FT221XS

Manufacturer No:

FT221XS

Manufacturer:

Package:

Description:

USB Full Speed to 8-Bit SPI/FT1248 IC with USB Charger Detection, SSOP-20 USB to 8-Bit SPI / FT1248 interface

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

FT221XS information

FT221XS technical specifications, attributes, parameters and parts with similar specifications to FT221XS.

Type
Parameter

Data Rates
1MByte/s

USB Speed
Full Speed (12Mbps)

USB Transfer Modes
Bulk

Interfaces
8-Bit SPI / FT1248

USB Host
No

Packages
20-pin SSOP

Channels
1

I/O Voltage
1.8V to 3.3V

USB Class
Vendor

Virtual Com Port
Yes

Operating Temperature
-40°C to +85°C

Download datasheets and manufacturer documentation for FT221XS.

FT221X – Full Speed USB to 8-bit FT1248 Bridge

This USB2.0 Full Speed IC offers a compact bridge to 8-Bit FT1248 interfaces. The device is a FT1248 slave, capable of operating up to 1MByte/s, with low power consumption (8mA). The FT221X includes the complete FT-X series feature set and enables USB to be added into a system design quickly and easily over an FT1248 interface

Key Hardware Features

FT1248 serial parallel interface in 1, 2, 4, or 8 bit wide mode.
Similar to an SPI slave in 1 bit mode
Entire USB protocol handled on the chip. No USB specific firmware programming required.
Fully integrated 2048 byte MTP Memory for storing device descriptors and CBUS I/O configuration.
Fully integrated clock generation with no external crystal required plus optional clock output selection enabling a glue-less interface to external MCU or FPGA.
Data transfer rates to 1MByte/s.
512 byte receive buffer and 512 byte transmit buffer utilizing buffer smoothing technology to allow for high data throughput.
FTDI’s royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB driver development in most cases.
Configurable CBUS I/O pin.
Device supplied pre-programmed with unique USB serial number.
Supports bus powered, self powered and high-power bus powered USB configurations.
Integrated +3.3V level converter for USB I/O.
True 3.3V CMOS drive output and TTL input. (operates down to 1V8 with external pull-ups)
I/O levels from 1.8V to 3.3V. (5V tolerant inputs).
Configurable I/O pin output drive strength.
Battery Charger Detection. May be used by mobile devices to detect the presence of a charger on the USB port to enable higher current / faster charging of batteries.
Integrated power-on-reset circuit.
Internal 3.3V/1.8V LDO regulators
Low operating current of 8mA (typical) and USB suspend current of 125uA (typical) current.
Low USB bandwidth consumption.
UHCI/OHCI/EHCI host controller compatible.
USB 2.0 Full Speed compatible.
Extended operating temperature range: -40°C to 85°C
20 Pin SSOP and QFN packages (both RoHS compliant).

Package

Partial, Tray or Reel

Part No:	FT221XS (qty 1-57)	Package Type:	Partial (Cut Tape)
Part No:	FT221XS-U (qty 58-2999)	Package Type:	TUBE
Part No:	FT221XS-R (qty >=3000)	Package Type:	REEL

Typical Applications

USB to SPI interface in 1-bit mode
Dedicated Charger Port (DCP) detection enabling battery charging at higher current for faster charge times.

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.