FT200XD

Manufacturer No:

FT200XD

Manufacturer:

Package:

Description:

USB Full Speed to I2C IC with USB Charger Detection, DFN-10 USB to I2C slave interface

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

FT200XD information

FT200XD technical specifications, attributes, parameters and parts with similar specifications to FT200XD.

Type
Parameter

Data Rates
3.4Mbit/s

USB Speed
Full Speed (12Mbps)

USB Transfer Modes
Bulk

Interfaces
I2C Slave

USB Host
No

Packages
10-pin DFN

Channels
1

I/O Voltage
1.8V to 3.3V

USB Class
Vendor

Virtual Com Port
Yes

Operating Temperature
-40°C to +85°C

Download datasheets and manufacturer documentation for FT200XD.

Datasheet:

113247daf982e01be13848e461305ccb.pdf

Technical Notes:

bb4bfd24990a11e275b251fd0454f661.pdf

FT200XD – Full Speed USB to I2C Bridge in 10 pin DFN package

This USB2.0 Full Speed IC offers a compact bridge to I2C devices. The device is an I2C slave, capable of operating up to 3.4MBit/s, with low power consumption (8mA). The FT200XD includes the complete FT-X series feature set and enables USB to be added into a system design quickly and easily over an I2C interface.

Key Hardware Features

Single chip USB to I2C interface.
Entire USB protocol handled on the chip. No USB specific firmware programming required.
Fully integrated 2048 byte Multi-Time-Programmable (MTP) memory for storing device descriptors and CBUS I/O configuration.
Fully integrated clock generation with no external crystal required plus optional clock output selection enabling a glue-less interface to external MCU or FPGA.
512 byte receive buffer and 512 byte transmit buffer utilizing buffer smoothing technology to allow for high data throughput.
FTDI’s royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB driver development in most cases.
Configurable CBUS I/O pin.
Battery Charger detection. May be used by mobile devices to detect the presence of a charger on the USB port for higher current / faster charging of batteries.
Device supplied pre-programmed with unique USB serial number.
Supports bus powered, self powered and high-power bus powered USB configurations.
Integrated +3.3V level converter for USB I/O.
True 3.3V CMOS drive output and TTL input.
- (Operates down to 1.8V with external pull ups and is also 5V tolerant)
Configurable I/O pin output drive strength.
Integrated power-on-reset circuit.
Internal 3.3V/1.8V LDO regulators
Low operating current of 8mA (typical) and USB suspend current of 125uA (typical) current.
Low USB bandwidth consumption.
UHCI/OHCI/EHCI host controller compatible.
USB 2.0 Full Speed compatible.
Extended operating temperature range: -40°C to 85°C.
Compact Pb-free 10 Pin DFN package (RoHS compliant

Package

Partial, Tray or Reel

Part No:	FT200XD (qty 1-489)	Package Type:	Partial (Cut Tape)
Part No:	FT200XD-T (qty 490-4999)	Package Type:	TRAY
Part No:	FT200XD-R (qty >=5000)	Package Type:	REEL

Typical Applications

Provide USB port to Microcontroller systems
- No need to decompose system software, insert USB, and re-validate
Motherboard and system monitoring through USB
Enable download capability from PC Host systems
Provide USB port to FPGA’s
Detecting the presence of USB charging ports for enabling high current battery charging.

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.