ONSEMI FAN54005UCX

Manufacturer No:

FAN54005UCX

Manufacturer:

ONSEMI

Package:

20-UFBGA, WLCSP

Description:

Battery Charge Controller, Switching, 200mA - 1.45 A, with USB-OTG Boost Regulator

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

FAN54005UCX information

ONSEMI FAN54005UCX technical specifications, attributes, parameters and parts with similar specifications to ONSEMI FAN54005UCX.

Type
Parameter

Number of Cells Charged
1

VCC Min (V)
4

ID Max (µA)
5

Case Outline
567SL

MSL Type
1

MSL Temp (°C)
260

Container Qty.
3000

Package Type
WLCSP-20

Container Type
REEL

Type
Li-Ion/Polymer

VCC Max (V)
6

Download datasheets and manufacturer documentation for ONSEMI FAN54005UCX.

Datasheet:

7df218e1ad94e05e7665d5b4df87808a.pdf

Package Drawing:

b67c69b01e4d3f37afcda55c7f6862df.pdf

The FAN54005 combines a highly integrated switch-mode charger, to minimize single-cell Lithium-ion (Li-ion) charging time from a USB power source, and a boost regulator to power a USB peripheral from the battery.The charging parameters and operating modes are programmable through an I2C Interface that operates up to 3.4 Mbps. The charger and boost regulator circuits switch at 3 MHz to minimize the size of external passive components.The FAN54005 provides battery charging in three phases: conditioning, constant current and constant voltage.To ensure USB compliance and minimize charging time, the input current limit can be changed through the I2C interface by the host processor. Charge termination is determined by a programmable minimum current level. A safety timer with reset control provides a safety backup for the I2C host. Charge status is reported to the host through the I2C port.The integrated circuit (IC) automatically restarts the charge cycle when the battery falls below an internal threshold. If the input source is removed, the IC enters a high-impedance mode, preventing leakage from the battery to the input. Charge current is reduced when the die temperature reaches 120°C, protecting the device and PCB from damage.The FAN54005 can operate as a boost regulator on command from the system. The boost regulator includes a soft-start that limits inrush current from the battery and uses the same external components used for charging the battery.

Application

Wireless Speakers, Headphones
IoT Devices
E-Cigs, Vapes
Toys, Drones, Digital Cameras
Cell Phones, Gaming Devices

Feature

Fully Integrated, High-Efficiency Charger for Single-Cell Li-Ion and Li-Polymer Battery Packs
Charge Voltage Accuracy:
±0.5% at 25°C
±1% from 0 to 125°C
Configurable for 200mA - 1.45A Systems using a single external resistor
±5% Input Current Regulation Accuracy
±5% Charge Current Regulation Accuracy
20 V Absolute Maximum Input Voltage
6 V Maximum Input Operating Voltage
Programmable through High-Speed I2C Interface (3.4 Mb/s) with Fast Mode Plus Compatibility
Input Current
Fast-Charge / Termination Current
Charger Voltage
Termination Enable
Small Footprint 1 H External Inductor
3 MHz Synchronous Buck PWM Controller with Wide Duty Cycle Range
1.8 V Regulated Output from VBUS for Auxiliary Circuits
Safety Timer with Reset Control
Low Reverse Leakage to Prevent Battery Drain to VBUS
Dynamic Input Voltage Control Automatically Reduces Charging Current with Weak Input Sources
5 V, 500 mA Boost Mode for USB OTG for 3.0 V to 4.5 V Battery Input

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.