ONSEMI FAN5365UC02X

ONSEMI FAN5365UC02X

Manufacturer No:

FAN5365UC02X

Manufacturer:

ONSEMI

Package:

9-UFBGA, WLCSP

Description:

1A/0.8A, 6MHz Digitally Programmable Regulator

Delivery:

DHL
DHL
DHL
DHL

Payment:

DHL
DHL
DHL
DHL
DHL
DHL
DHL

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

FAN5365UC02X information

ONSEMI FAN5365UC02X technical specifications, attributes, parameters and parts with similar specifications to ONSEMI FAN5365UC02X.

  • Type
  • Parameter
  • MSL Type
  • 1
  • IO Typ (A)
  • -
  • Efficiency (%)
  • -
  • Control Mode
  • Voltage Mode
  • VO Typ (V)
  • -
  • Container Qty.
  • 3000
  • VCC Min (V)
  • 2.3
  • VCC Max (V)
  • 5.5
  • fSW Typ (kHz)
  • -
  • MSL Temp (°C)
  • 260
  • Container Type
  • REEL
  • Topology
  • Step-Down
  • Package Type
  • WLCSP-9
  • Case Outline
  • 567QF

Download datasheets and manufacturer documentation for ONSEMI FAN5365UC02X.

Datasheet:

Package Drawing:

The FAN5365 is a high-frequency, ultra-fast transient response, synchronous step-down, DC-DC converter optimized for low-power applications using small, low-cost inductors and capacitors. The FAN5365 supports up to 800mA or 1A load current.The FAN5365 is ideal for mobile phones and similar portable applications powered by a single-cell Lithium-Ion battery. With an output voltage range adjustable via I2C interface from 0.75V to 1.975V, it supports low-voltage DSPs and processors, core power supplies, and memory modules in smart phones, data cards, and hand-held computers. The FAN5365 operates at 6MHz (nominal) fixed switching frequency in PWM mode.During light-load conditions, the regulator includes a PFM Mode to enhance light-load efficiency. The regulator transitions smoothly between PWM and PFM Modes with no glitches on VOUT. In hardware shutdown, the current consumption is reduced to less than 200nA.The serial interface is compatible with Fast / Standard Mode, Fast Mode Plus, and High-Speed Mode I2C™ specifications, allowing transfers up to 3.4Mbps. This interface is used for dynamic voltage scaling with 12.5mV voltage steps, for reprogramming the mode of operation (PFM or forced PWM), or to disable/enable the output voltage.The chip's advanced protection features include short-circuit protection and current and temperature limits. During a sustained over-current event, the IC shuts down and restarts after a delay to reduce average power dissipation into a fault.During startup, the IC controls the output slew rate to minimize input current and output overshoot at the end of soft-start. The IC maintains a consistent soft-start ramp, regardless of output load during startup. The FAN5365 is available in a 1.27 x 1.29mm, 9-bump WLCSP package.

Application

  • TBA

Feature

  • High Efficiency (>88%) at 6MHz
  • 800mA or 1A Output Current
  • Regulation Maintained with VIN from 2.3V to 5.5V
  • 6-Bit VOUT Programmable from 0.75 to 1.975V
  • 6MHz Fixed-Frequency Operation (PWM Mode)
  • Excellent Load and Line Transient Response
  • Small Size, 470nH Inductor Solution
  • ±2% DC Voltage Accuracy in PWM Mode
  • 25ns Minimum On-Time
  • High-Efficiency, Low-Ripple, Light-Load PFM
  • Smooth Transition between PWM and PFM
  • 40µA Operating PFM Quiescent Current
  • I2C-Compatible Interface up to 3.4Mbps
  • Pin-Selectable or I2C™ Programmable Output Voltage
  • 9-Bump, 1.27 x 1.29mm, 0.4mm Pitch WLCSP Package

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step1：Prepare product

Step2：Desiccant Protection

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step3：Vacuum Packaging

Step4：Individual Package

Step4：Individual Package

Step5：Anti-collision Filling

Step5：Anti-collision Filling

Step6：Packaging Box

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.

FAN5365UC02X Relevant information

The following parts are popular search parts in Integrated Circuits (ICs).