TI DRV8432DKD

Manufacturer No:

DRV8432DKD

Manufacturer:

Package:

36-BSSOP (0.433, 11.00mm Width) Exposed Pad

Description:

Tube 36-BSSOP (0.433, 11.00mm Width) Exposed Pad PWM 10.8V~13.2V Surface Mount -40°C~150°C TJ DC Motors, Stepper Motors Half Bridge (4) Inductive 0V~52.5V

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

DRV8432DKD information

TI DRV8432DKD technical specifications, attributes, parameters and parts with similar specifications to TI DRV8432DKD.

Type
Parameter

Lifecycle Status
ACTIVE (Last Updated: 1 week ago)

Factory Lead Time
6 Weeks

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
36-BSSOP (0.433, 11.00mm Width) Exposed Pad

Number of Pins
36

Operating Temperature
-40°C~150°C TJ

Packaging
Tube

JESD-609 Code
e4

Feature
Status Flag

Pbfree Code
yes

Part Status
Active

Moisture Sensitivity Level (MSL)
4 (72 Hours)

Number of Terminations
36

ECCN Code
EAR99

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Applications
DC Motors, Stepper Motors

Subcategory
Motion Control Electronics

Technology
Power MOSFET

Voltage - Supply
10.8V~13.2V

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
2

Terminal Pitch
0.65mm

Base Part Number
DRV8432

Pin Count
36

Number of Outputs
2

Output Voltage
30V

Operating Supply Voltage
50V

Interface
PWM

Nominal Supply Current
9mA

Output Configuration
Half Bridge (4)

Output Current
14A

Collector Emitter Voltage (VCEO)
52V

Max Collector Current
6A

Voltage - Load
0V~52.5V

Current - Output / Channel
7A

Fault Protection
Current Limiting, Over Temperature, Short Circuit, UVLO

Rds On (Typ)
110m ? LS, 110m ? HS

Switching Frequency
500kHz

Motor Type
Stepper

Current - Peak Output
12A

Load Type
Inductive

Height
3.6mm

Length
15.9mm

Width
11mm

Download datasheets and manufacturer documentation for TI DRV8432DKD.

Datasheets:

texasinstruments-trf370417irget-datasheets-0676.pdf

DRV8432DKD Overview

To package H bridge, use Tube.In an effort to save money, H bridge is included in the 36-BSSOP (0.433, 11.00mm Width) Exposed Pad package.With the 10.8V~13.2V supply voltage, improved reliabilbridge drivery can be achieved.There is a mounting of H bridge circuit in Surface Mount.As long as -40°C~150°C TJ operates at the right temperature, motor driver H bridge will operate normally.H bridge motor driver has many applications, including DC Motors, Stepper Motors.The PCB is mounted wH gateh Surface Mount.Status Flag is another of full bridges specific characteristics.It is possible to terminate a transmission line with a 36 termination using the H bridge which matches the characteristic impedance of the transmission line.It is used as a pronged contact as H bridge ic of a signal interface when 36 pins are used.This H bridge ic has a base H bridge ic number of DRV8432 which allows more related H bridge ics to be identified.This H bridge operates with a voltage of 50V.Output reaches 12A at the maximum current.As a result of the current flowing through the output and power supply pins, there is a current of 14A.It is made up of two 36 pins that work together to perform the specific functions of this bridge driver.There is a 2 output on it.H bridge motor drivers in the Motion Control Electronics subcategory have a number of similarities.For the highest level of efficiency, the operating supply voltage is kept at 50V.The Hbridge emits a voltage of 30V.

DRV8432DKD Features

Available in 36-BSSOP (0.433, 11.00mm Width) Exposed Pad Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : DRV8432
Subcategory: 12A
Number of Receivers: 50V

DRV8432DKD Applications

There are a lot of Texas Instruments
DRV8432DKD Full Bridge Drivers, Half-Bridge Drivers applications.

DC-DC Converters
Desktop Computers
V-Core
Non-V-Core
Workstations
High-Current DC-DC Point-of-Load Converters
Networking Microprocessor Voltage Regulators
Telecom Microprocessor
Voltage Regulators
Small Form-Factor Voltage Regulator Modules

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.