TI DRV1100U/2K5G4

Manufacturer No:

DRV1100U/2K5G4

Manufacturer:

Package:

SOIC

Description:

1 Channels 1pA 62 dB Instrumentational OP Amps 8 Pins SOIC

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

DRV1100U/2K5G4 information

TI DRV1100U/2K5G4 technical specifications, attributes, parameters and parts with similar specifications to TI DRV1100U/2K5G4.

Type
Parameter

Mount
Surface Mount

Package / Case
SOIC

Number of Pins
8

Weight
75.891673mg

Packaging
Tape and Reel

JESD-609 Code
e4

Pbfree Code
yes

Moisture Sensitivity Level (MSL)
2 (1 Year)

Number of Terminations
8

ECCN Code
EAR99

Resistance
10GOhm

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Max Operating Temperature
85°C

Min Operating Temperature
-40°C

Technology
CMOS

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
1

Supply Voltage
5V

Pin Count
8

Temperature Grade
INDUSTRIAL

Number of Channels
1

Max Supply Voltage
5.5V

Power Dissipation-Max
446mW

Nominal Supply Current
11mA

Power Dissipation
446mW

Slew Rate
80 V/μs

Common Mode Rejection Ratio
62 dB

Current - Input Bias
1pA

Input Offset Voltage (Vos)
5mV

Differential Output
YES

Voltage Gain
9.54dB

Power Supply Rejection Ratio (PSRR)
60dB

Input Characteristics
DIFFERENTIAL

Interface IC Type
LINE DRIVER

Driver Number of Bits
1

Interface Standard
GENERAL PURPOSE

Length
4.9mm

Width
3.9mm

Radiation Hardening
No

RoHS Status
RoHS Compliant

Lead Free
Contains Lead

Download datasheets and manufacturer documentation for TI DRV1100U/2K5G4.

DRV1100U/2K5G4 Overview

Packaged in a SOIC case, the buffer op amp is ready to use. The op amp is delivered to you in a Tape and Reel case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 5mV for this buffer op amp. 9.54dB should remain the voltage gain. As far as the device is concerned, buffer amplifier has 1 channels. For the buffer op amp to operate properly, it must be above the temperature of -40°C degrees Celsius. No temperature greater than 85°C should be used. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 5.5V. A high supply voltage of more than 4.5V is recommended for the instrumentation amplifier's supply voltage. Instrumentation amplifier resistance should stay within the range of 10GOhm. It is possible to classify the electronic ic chip as LINE DRIVER in terms of its interface IC type.

DRV1100U/2K5G4 Features

8 Pins
supply voltage of 5V
9.54dB voltage gain
Resistance of 10GOhm

DRV1100U/2K5G4 Applications

There are a lot of Texas Instruments
DRV1100U/2K5G4 Instrumentational OP Amps applications.

Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.