VISHAY DG449DS-T1-E3

Manufacturer No:

DG449DS-T1-E3

Manufacturer:

VISHAY

Package:

SOT-23-8

Description:

146ns, 104ns SPDT 45Ohm Analog Switches BREAK-BEFORE-MAKE DG449 8 Pins 1nA 15V SOT-23-8

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

DG449DS-T1-E3 information

VISHAY DG449DS-T1-E3 technical specifications, attributes, parameters and parts with similar specifications to VISHAY DG449DS-T1-E3.

Type
Parameter

Factory Lead Time
10 Weeks

Contact Plating
Tin

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
SOT-23-8

Number of Pins
8

Weight
40.001177mg

Operating Temperature
-40°C~85°C TA

Packaging
Tape & Reel (TR)

Published
2017

JESD-609 Code
e3

Pbfree Code
yes

Part Status
Active

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

Resistance
45Ohm

Subcategory
Multiplexer or Switches

Max Power Dissipation
675mW

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
1

Supply Voltage
15V

Terminal Pitch
0.65mm

Time@Peak Reflow Temperature-Max (s)
10

Pin Count
8

Polarity
Non-Inverting

Number of Channels
1

Number of Circuits
1

Max Supply Voltage
36V

Min Supply Voltage
7V

Operating Supply Current
20?A

Nominal Supply Current
4?A

Power Dissipation
675mW

Max Supply Current
20?A

Turn On Delay Time
146 ns

Number of Inputs
3

Voltage - Supply, Single/Dual (±)
7V~36V ±4.5V~20V

Supply Type
Dual, Single

Neg Supply Voltage-Nom (Vsup)
-15V

Turn-Off Delay Time
104 ns

Max Dual Supply Voltage
20V

On-State Resistance (Max)
45Ohm

Min Dual Supply Voltage
4.5V

High Level Output Current
30mA

Multiplexer/Demultiplexer Circuit
2:1

Off-state Isolation-Nom
69 dB

Current - Leakage (IS(off)) (Max)
1nA

Download datasheets and manufacturer documentation for VISHAY DG449DS-T1-E3.

Datasheets:

vishaysiliconix-dg449dst1e3-datasheets-9078.pdf

RohsStatement:

vishaydale-imc0402rk47nj-rohsstatement-4552.pdf

DG449DS-T1-E3 Overview

The electrical component comes in SOT-23-8 packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. In Surface Mount, you'll find this switch device. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Operating temperature around -40°C~85°C TA extended. In total, 8 terminations have occurred. A electrical component with 1 channels is capable of high-quality output. When the electronic component is given a voltage of 15V, it should be turned on and run. Into the electrical component body are injected 8 pins. On the other hand, analog switches can be constructed using SPDT switching circuits. Circuits number 1 make up this analogue multiplexer. Look for analog switch ic variants by searching with DG449. A 45Ohm internal resistance characterizes this multiplexer. The datasheets for the 8 pins explain the functions. The analog multiplexer shown here is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 36V. A analog switch ic that has a cost-effective Dual, Single supply type. It is recommended to use 7V as the lowest voltage for the electrical part. The analogue multiplexer could operate on 20?A current. A voltage higher than 20?A may cause damage to the switch multiplexer. For this switch, a dual supply voltage is feasible, but it must not exceed 20VFor dual power supplies, a voltage of at least 4.5V should be attached. Among the inputs that can be operated are the 3 inputs. There is 38Ohm Drain to Source resistance on this electronic part.

DG449DS-T1-E3 Features

1 Channels
Switch Circuit: SPDT
20?A Supply Current
Drain-to-Source resistance: 38Ohm

DG449DS-T1-E3 Applications

There are a lot of Vishay Siliconix
DG449DS-T1-E3 Analog Switches & Multiplexers ICs applications.

Audio and video switching
Automatic test equipment
Precision data acquisition
Battery-powered systems
Sample-and-hold systems
Communication systems
Data Acquisition Systems
Relay Replacement
Battery Powered Systems
Existing multiplexer applications (both fault-protected and nonfault-protected)

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.