VISHAY DG444BDY

Manufacturer No:

DG444BDY

Manufacturer:

VISHAY

Package:

16-SOIC (0.154, 3.90mm Width)

Description:

300ns, 200ns SPST - NC 80Ohm Analog Switches BREAK-BEFORE-MAKE 16 Pins 500pA 15V 16-SOIC (0.154, 3.90mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

DG444BDY information

VISHAY DG444BDY technical specifications, attributes, parameters and parts with similar specifications to VISHAY DG444BDY.

Type
Parameter

Mounting Type
Surface Mount

Package / Case
16-SOIC (0.154, 3.90mm Width)

Surface Mount
YES

Number of Pins
16

Weight
665.986997mg

Operating Temperature
-40°C~85°C TA

Packaging
Tube

JESD-609 Code
e0

Pbfree Code
no

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
16

Resistance
80Ohm

Terminal Finish
TIN LEAD

Subcategory
Multiplexer or Switches

Max Power Dissipation
640mW

Technology
CMOS

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
240

Number of Functions
4

Supply Voltage
15V

Terminal Pitch
1.27mm

Reach Compliance Code
unknown

Time@Peak Reflow Temperature-Max (s)
30

Pin Count
16

Qualification Status
Not Qualified

Number of Channels
1

Number of Circuits
4

Max Supply Voltage
36V

Min Supply Voltage
13V

Max Supply Current
1μA

Turn On Delay Time
300 ns

Voltage - Supply, Single/Dual (±)
12V ±15V

Supply Type
Dual, Single

Neg Supply Voltage-Nom (Vsup)
-15V

Turn-Off Delay Time
200 ns

Max Dual Supply Voltage
22V

On-State Resistance (Max)
80Ohm

Min Dual Supply Voltage
7V

Dual Supply Voltage
15V

Multiplexer/Demultiplexer Circuit
1:1

Off-state Isolation-Nom
90 dB

Current - Leakage (IS(off)) (Max)
500pA

Channel Capacitance (CS(off), CD(off))
5pF 5pF

Switch Circuit
SPST - NC

Switch Time (Ton, Toff) (Max)
300ns, 200ns

Charge Injection
1pC

Download datasheets and manufacturer documentation for VISHAY DG444BDY.

Datasheets:

vishaysiliconix-dg444bdj-datasheets-7580.pdf

RohsStatement:

vishaydale-imc0402rk47nj-rohsstatement-4552.pdf

DG444BDY Overview

The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tube is used. In Surface Mount, you'll find this switch device. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operating temperature around -40°C~85°C TA extended. In total, 16 terminations have occurred. A electrical component with 1 channels is capable of high-quality output. When the electronic component is given a voltage of 15V, it should be turned on and run. As part of the design of the 16 series, this electronic part has been incorporated into the system. On the other hand, analog switches can be constructed using SPST - NC switching circuits. Circuits number 4 make up this analogue multiplexer. A 80Ohm internal resistance characterizes this multiplexer. The datasheets for the 16 pins explain the functions. The analog multiplexer shown here is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 36V. A analog switch ic that has a cost-effective Dual, Single supply type. It is recommended to use 13V as the lowest voltage for the electrical part. A voltage higher than 1μA may cause damage to the switch multiplexer. For this switch, a dual supply voltage is feasible, but it must not exceed 22VFor dual power supplies, a voltage of at least 7V should be attached. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer.

DG444BDY Features

1 Channels
Switch Circuit: SPST - NC

DG444BDY Applications

There are a lot of Vishay Siliconix
DG444BDY Analog Switches & Multiplexers ICs applications.

Audio and video switching
Automatic test equipment
Precision data acquisition
Battery-powered systems
Sample-and-hold systems
Communication systems
Data Acquisition Systems
Relay Replacement
Battery Powered Systems
Existing multiplexer applications (both fault-protected and nonfault-protected)

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.