VISHAY DG442DY-T1-E3

Manufacturer No:

DG442DY-T1-E3

Manufacturer:

VISHAY

Package:

16-SOIC (0.154, 3.90mm Width)

Description:

250ns, 210ns SPST - NO 85Ohm Analog Switches BREAK-BEFORE-MAKE DG442 16 Pins 500pA 15V 16-SOIC (0.154, 3.90mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

DG442DY-T1-E3 information

VISHAY DG442DY-T1-E3 technical specifications, attributes, parameters and parts with similar specifications to VISHAY DG442DY-T1-E3.

Type
Parameter

Factory Lead Time
13 Weeks

Contact Plating
Tin

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
16-SOIC (0.154, 3.90mm Width)

Number of Pins
16

Weight
665.986997mg

Operating Temperature
-40°C~85°C TA

Packaging
Tape & Reel (TR)

Published
2013

JESD-609 Code
e3

Pbfree Code
yes

Part Status
Active

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
16

Resistance
85Ohm

Subcategory
Multiplexer or Switches

Max Power Dissipation
900mW

Technology
CMOS

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
4

Supply Voltage
15V

Terminal Pitch
1.27mm

Base Part Number
DG442

Pin Count
16

Polarity
Non-Inverting

Number of Channels
1

Max Supply Voltage
36V

Min Supply Voltage
13V

Operating Supply Current
15?A

Nominal Supply Current
15?A

Power Dissipation
900mW

Max Supply Current
100?A

Throw Configuration
SPST

Turn On Delay Time
250 ns

Number of Inputs
4

Voltage - Supply, Single/Dual (±)
12V ±15V

Supply Type
Dual, Single

Neg Supply Voltage-Nom (Vsup)
-15V

Turn-Off Delay Time
120 ns

Max Dual Supply Voltage
22V

On-State Resistance (Max)
85Ohm

Min Dual Supply Voltage
7V

High Level Output Current
30mA

Dual Supply Voltage
15V

Multiplexer/Demultiplexer Circuit
1:1

Download datasheets and manufacturer documentation for VISHAY DG442DY-T1-E3.

Datasheets:

vishaysiliconix-dg441dje3-datasheets-4856.pdf

RohsStatement:

vishaydale-imc0402rk47nj-rohsstatement-4552.pdf

DG442DY-T1-E3 Overview

Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. Multiplexer and demultiplexer circuits have a number 1:1. Increasing operating temperature to around -40°C~85°C TA. Totally, there are 16 terminations. A high-quality output is provided by the electrical component's 1 channels. It is safe to turn on and run the electronic component with a 15V voltage supply. A total of 16 pins are injected into the electrical part body. A SPST - NO switching circuit is used for these analog switches. Using the DG442 search parameter, you can discover variants of the switch. In this multiplexer, the internal resistance is 85Ohm. For details about the functions of 16 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. It is generally not recommended to supply a voltage higher than 36V to the switch device in normal circumstances. The digital multiplexer has a low cost Dual, Single supply. 13V is the lowest voltage the electrical component should receive. For this digital switch to work, 15?A current would suffice. Putting voltage greater than 100?A on the multiplexer may cause damage. There is no problem with using dual supply voltage, but it should not exceed 22V. With dual power supplies, you should attach at least 7V. The 4 inputs need to be operated in order to work. A Drain to Source resistance of 50Ohm is shown for this electronic part.

DG442DY-T1-E3 Features

1 Channels
Switch Circuit: SPST - NO
15?A Supply Current
Drain-to-Source resistance: 50Ohm

DG442DY-T1-E3 Applications

There are a lot of Vishay Siliconix
DG442DY-T1-E3 Analog Switches & Multiplexers ICs applications.

Precision data acquisition
Battery-powered systems
Sample-and-hold systems
Communication systems
Data Acquisition Systems
Relay Replacement
Battery Powered Systems
Existing multiplexer applications (both fault-protected and nonfault-protected)
New designs requiring multiplexer functions
Cellular phones

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.