ADI DG442DJ

Manufacturer No:

DG442DJ

Manufacturer:

ADI

Package:

16-DIP (0.300, 7.62mm)

Description:

250ns, 170ns SPST - NO 85Ohm Analog Switches BREAK-BEFORE-MAKE DG442 16 Pins 500pA 15V 16-DIP (0.300, 7.62mm)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

DG442DJ information

ADI DG442DJ technical specifications, attributes, parameters and parts with similar specifications to ADI DG442DJ.

Type
Parameter

Mount
Through Hole

Mounting Type
Through Hole

Package / Case
16-DIP (0.300, 7.62mm)

Number of Pins
16

Operating Temperature
-40°C~85°C TA

Packaging
Tube

Published
2009

JESD-609 Code
e0

Pbfree Code
no

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
16

ECCN Code
EAR99

Resistance
160Ohm

Terminal Finish
Tin/Lead (Sn85Pb15)

Subcategory
Multiplexer or Switches

Max Power Dissipation
842mW

Technology
CMOS

Peak Reflow Temperature (Cel)
240

Number of Functions
4

Supply Voltage
15V

Time@Peak Reflow Temperature-Max (s)
20

Base Part Number
DG442

Output
SEPARATE OUTPUT

Power Supplies
12/+-15V

Number of Channels
4

Max Supply Voltage
30V

Min Supply Voltage
10V

Nominal Supply Current
15?A

Max Supply Current
100?A

Throw Configuration
SPST

Turn On Delay Time
250 ns

Voltage - Supply, Single/Dual (±)
10V~30V ±4.5V~20V

Supply Type
Dual, Single

Neg Supply Voltage-Nom (Vsup)
-15V

Turn-Off Delay Time
170 ns

Max Dual Supply Voltage
20V

On-State Resistance (Max)
85Ohm

Min Dual Supply Voltage
4.5V

Multiplexer/Demultiplexer Circuit
1:1

Off-state Isolation-Nom
60 dB

Current - Leakage (IS(off)) (Max)
500pA

Channel Capacitance (CS(off), CD(off))
4pF 4pF

On-state Resistance Match-Nom
4Ohm

Switch Circuit
SPST - NO

Switch Time (Ton, Toff) (Max)
250ns, 170ns

Charge Injection
5pC

Download datasheets and manufacturer documentation for ADI DG442DJ.

Datasheets:

maximintegrated-dg442dy-datasheets-0792.pdf

maximintegrated-dg442dj-datasheets-3046.pdf

maximintegrated-dg442dj-datasheets-3047.pdf

ConflictMineralStatement:

maximintegrated-ds1075z66n-conflictmineralstatement-7504.pdf

DG442DJ Overview

The electrical component comes in 16-DIP (0.300, 7.62mm) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tube is used. In Through Hole, you'll find this switch device. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operating temperature around -40°C~85°C TA extended. In total, 16 terminations have occurred. A electrical component with 4 channels is capable of high-quality output. When the electronic component is given a voltage of 15V, it should be turned on and run. Into the electrical component body are injected 16 pins. On the other hand, analog switches can be constructed using SPST - NO switching circuits. Look for analog switch ic variants by searching with DG442. A 160Ohm internal resistance characterizes this multiplexer. The datasheets for the 16 pins explain the functions. The analog multiplexer shown here is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 30V. A analog switch ic that has a cost-effective Dual, Single supply type. It is recommended to use 10V as the lowest voltage for the electrical part. A voltage higher than 100?A may cause damage to the switch multiplexer. For this switch, a dual supply voltage is feasible, but it must not exceed 20VFor dual power supplies, a voltage of at least 4.5V should be attached. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer.

DG442DJ Features

4 Channels
Switch Circuit: SPST - NO

DG442DJ Applications

There are a lot of Maxim Integrated
DG442DJ Analog Switches & Multiplexers ICs applications.

Audio and video switching
Automatic test equipment
Precision data acquisition
Battery-powered systems
Sample-and-hold systems
Communication systems
Data Acquisition Systems
Relay Replacement
Battery Powered Systems
Existing multiplexer applications (both fault-protected and nonfault-protected)

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.