ADI DG412DY+

Manufacturer No:

DG412DY+

Manufacturer:

ADI

Package:

16-SOIC (0.154, 3.90mm Width)

Description:

175ns, 145ns SPST - NO 45Ohm Analog Switches BREAK-BEFORE-MAKE DG412 16 Pins 250pA 15V 16-SOIC (0.154, 3.90mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

DG412DY+ information

ADI DG412DY+ technical specifications, attributes, parameters and parts with similar specifications to ADI DG412DY+.

Type
Parameter

Factory Lead Time
9 Weeks

Contact Plating
Tin

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
16-SOIC (0.154, 3.90mm Width)

Number of Pins
16

Operating Temperature
-40°C~85°C TA

Packaging
Tube

Published
2004

JESD-609 Code
e3

Pbfree Code
yes

Part Status
Active

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
16

ECCN Code
EAR99

Resistance
80Ohm

Subcategory
Multiplexer or Switches

Max Power Dissipation
696mW

Technology
CMOS

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
4

Supply Voltage
15V

Terminal Pitch
1.27mm

Base Part Number
DG412

Pin Count
16

Operating Supply Voltage
20V

Power Supplies
512/+-15V

Number of Channels
4

Max Supply Voltage
30V

Min Supply Voltage
10V

Operating Supply Current
100pA

Nominal Supply Current
5?A

Max Supply Current
1?A

Throw Configuration
SPST

Turn On Delay Time
220 ns

Voltage - Supply, Single/Dual (±)
10V~30V ±4.5V~20V

Supply Type
Dual, Single

Neg Supply Voltage-Nom (Vsup)
-15V

Turn-Off Delay Time
160 ns

Max Dual Supply Voltage
20V

On-State Resistance (Max)
45Ohm

Min Dual Supply Voltage
4.5V

High Level Output Current
30mA

Dual Supply Voltage
9V

Multiplexer/Demultiplexer Circuit
1:1

Off-state Isolation-Nom
68 dB

Download datasheets and manufacturer documentation for ADI DG412DY+.

Datasheets:

maximintegrated-dg412dy-datasheets-0826.pdf

ConflictMineralStatement:

maximintegrated-ds1075z66n-conflictmineralstatement-7504.pdf

DG412DY+ Overview

Shipping overseas is convenient with the electronic component packed in 16-SOIC (0.154, 3.90mm Width). High reliability is provided by advanced packaging method Tube. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 1:1. Temperatures around -40°C~85°C TA are extended for operation. Total terminations are 16. High-quality output is provided by the electronic component's 4 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. The electronic part body is injected with 16 pins. A SPST - NO switching circuit is used to build these analog multiplexers. Try searching with DG412 if you're looking for variants. There is 80Ohm internal resistance in this digital multiplexer. For functions related to 16 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. A voltage higher than 30V should not normally be supplied to the switches. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 10V should be the lowest voltage fed to the electronic component. For this multiplexer to operate, 100pA current would be sufficient. The analogue multiplexer may be damaged if voltage is greater than 1?A. If put voltage greater than 20V on the multiplexer, damage may be caused to the device. If you are using dual power supplies, you should attach at least 4.5V. 20V operating voltages are supported by the electronic component. Drain to Source resistance is 45Ohm.

DG412DY+ Features

4 Channels
Switch Circuit: SPST - NO
100pA Supply Current
Drain-to-Source resistance: 45Ohm

DG412DY+ Applications

There are a lot of Maxim Integrated
DG412DY+ Analog Switches & Multiplexers ICs applications.

Transmit
Low-Voltage
Isolation
Medical
Imaging
Ultrasound
Audio and video switching
Automatic test equipment
Precision data acquisition
Battery-powered systems

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.