VISHAY DG333ALDW-T1-E3

Manufacturer No:

DG333ALDW-T1-E3

Manufacturer:

VISHAY

Package:

20-SOIC (0.295, 7.50mm Width)

Description:

175ns, 145ns SPDT 45Ohm Analog Switches BREAK-BEFORE-MAKE DG333 250pA 15V 20-SOIC (0.295, 7.50mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

DG333ALDW-T1-E3 information

VISHAY DG333ALDW-T1-E3 technical specifications, attributes, parameters and parts with similar specifications to VISHAY DG333ALDW-T1-E3.

Type
Parameter

Factory Lead Time
12 Weeks

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
20-SOIC (0.295, 7.50mm Width)

Number of Pins
20

Operating Temperature
-40°C~85°C TA

Packaging
Tape & Reel (TR)

Published
2008

Part Status
Active

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
20

Resistance
75Ohm

Subcategory
Multiplexer or Switches

Max Power Dissipation
800mW

Technology
CMOS

Terminal Form
GULL WING

Number of Functions
4

Supply Voltage
15V

Base Part Number
DG333

Number of Outputs
8

Polarity
Non-Inverting

Number of Channels
4

Number of Circuits
1

Max Supply Voltage
40V

Operating Supply Current
1μA

Nominal Supply Current
200μA

Power Dissipation
800mW

Max Supply Current
1μA

Turn On Delay Time
175 ns

Voltage - Supply, Single/Dual (±)
5V~40V ±4V~22V

Supply Type
Dual, Single

Neg Supply Voltage-Nom (Vsup)
-15V

Turn-Off Delay Time
145 ns

Max Dual Supply Voltage
22V

On-State Resistance (Max)
45Ohm

Min Dual Supply Voltage
4V

Multiplexer/Demultiplexer Circuit
2:1

Off-state Isolation-Nom
72 dB

Current - Leakage (IS(off)) (Max)
250pA

Channel Capacitance (CS(off), CD(off))
8pF

On-state Resistance Match-Nom
2Ohm

Switch Circuit
SPDT

Switch Time (Ton, Toff) (Max)
175ns, 145ns

Charge Injection
10pC

Channel-to-Channel Matching (ΔRon)
2 Ω (Max)

Crosstalk
-80dB @ 1MHz

Switching
BREAK-BEFORE-MAKE

Download datasheets and manufacturer documentation for VISHAY DG333ALDW-T1-E3.

Datasheets:

vishaysiliconix-dg333adwe3-datasheets-5131.pdf

RohsStatement:

vishaydale-imc0402rk47nj-rohsstatement-4552.pdf

DG333ALDW-T1-E3 Overview

Shipping overseas is convenient with the electronic component packed in 20-SOIC (0.295, 7.50mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 2:1. Temperatures around -40°C~85°C TA are extended for operation. Total terminations are 20. High-quality output is provided by the electronic component's 4 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. A SPDT switching circuit is used to build these analog multiplexers. There are 1 circuits in this multiplexer. Try searching with DG333 if you're looking for variants. There is 75Ohm internal resistance in this digital multiplexer. For functions related to 20 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. A voltage higher than 40V should not normally be supplied to the switches. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 5V should be the lowest voltage fed to the electronic component. For this multiplexer to operate, 1μA current would be sufficient. The analogue multiplexer may be damaged if voltage is greater than 1μA. If put voltage greater than 22V on the multiplexer, damage may be caused to the device. If you are using dual power supplies, you should attach at least 4V. Drain to Source resistance is 45Ohm. The analogue multiplexer has 8 outputs.

DG333ALDW-T1-E3 Features

4 Channels
Switch Circuit: SPDT
1μA Supply Current
Drain-to-Source resistance: 45Ohm

DG333ALDW-T1-E3 Applications

There are a lot of Vishay Siliconix
DG333ALDW-T1-E3 Analog Switches & Multiplexers ICs applications.

Transmit
Low-Voltage
Isolation
Medical
Imaging
Ultrasound
Audio and video switching
Automatic test equipment
Precision data acquisition
Battery-powered systems

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.