VISHAY DG212BDY

Manufacturer No:

DG212BDY

Manufacturer:

VISHAY

Package:

16-SOIC (0.154, 3.90mm Width)

Description:

300ns, 200ns SPST - NO 85Ohm Analog Switches BREAK-BEFORE-MAKE 16 Pins 500pA 16-SOIC (0.154, 3.90mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

DG212BDY information

VISHAY DG212BDY technical specifications, attributes, parameters and parts with similar specifications to VISHAY DG212BDY.

Type
Parameter

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
16-SOIC (0.154, 3.90mm Width)

Number of Pins
16

Weight
547.485991mg

Operating Temperature
-40°C~85°C TA

Packaging
Bulk

Published
2014

JESD-609 Code
e0

Pbfree Code
no

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
16

Resistance
85Ohm

Terminal Finish
Tin/Lead (Sn/Pb)

Subcategory
Multiplexer or Switches

Max Power Dissipation
640mW

Technology
CMOS

Terminal Form
GULL WING

Number of Functions
4

Terminal Pitch
1.27mm

Output
SEPARATE OUTPUT

Pin Count
16

Qualification Status
Not Qualified

Max Supply Voltage
25V

Min Supply Voltage
4.5V

Operating Supply Current
30mA

Nominal Supply Current
50μA

Power Dissipation
640mW

Max Supply Current
10μA

Throw Configuration
SPST

Turn On Delay Time
300 ns

Number of Inputs
4

Voltage - Supply, Single/Dual (±)
4.5V~25V ±4.5V~22V

Supply Type
Dual, Single

Turn-Off Delay Time
200 ns

Max Dual Supply Voltage
22V

On-State Resistance (Max)
85Ohm

Min Dual Supply Voltage
4.5V

Multiplexer/Demultiplexer Circuit
1:1

Current - Leakage (IS(off)) (Max)
500pA

Channel Capacitance (CS(off), CD(off))
5pF 5pF

Switch Circuit
SPST - NO

Switch Time (Ton, Toff) (Max)
300ns, 200ns

Charge Injection
1pC

Channel-to-Channel Matching (ΔRon)
2 Ω

Crosstalk
-95dB @ 100kHz

Download datasheets and manufacturer documentation for VISHAY DG212BDY.

Datasheets:

vishaysiliconix-dg212bdyt1-datasheets-7664.pdf

RohsStatement:

vishaydale-imc0402rk47nj-rohsstatement-4552.pdf

DG212BDY Overview

The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Bulk is used. In Surface Mount, you'll find this switch device. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operating temperature around -40°C~85°C TA extended. In total, 16 terminations have occurred. Into the electrical component body are injected 16 pins. On the other hand, analog switches can be constructed using SPST - NO switching circuits. A 85Ohm internal resistance characterizes this multiplexer. The datasheets for the 16 pins explain the functions. The analog multiplexer shown here is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 25V. A analog switch ic that has a cost-effective Dual, Single supply type. It is recommended to use 4.5V as the lowest voltage for the electrical part. The analogue multiplexer could operate on 30mA current. A voltage higher than 10μA may cause damage to the switch multiplexer. For this switch, a dual supply voltage is feasible, but it must not exceed 22VFor dual power supplies, a voltage of at least 4.5V should be attached. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. Among the inputs that can be operated are the 4 inputs. There is 85Ohm Drain to Source resistance on this electronic part.

DG212BDY Features

Switch Circuit: SPST - NO
30mA Supply Current
Drain-to-Source resistance: 85Ohm

DG212BDY Applications

There are a lot of Vishay Siliconix
DG212BDY Analog Switches & Multiplexers ICs applications.

Audio and video switching
Automatic test equipment
Precision data acquisition
Battery-powered systems
Sample-and-hold systems
Communication systems
Data Acquisition Systems
Relay Replacement
Battery Powered Systems
Existing multiplexer applications (both fault-protected and nonfault-protected)

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.