CY74FCT374CTQCT-TI-Price, Stock & Datasheet

CY74FCT374CTQCT Overview

It is packaged in the way of 20-SSOP (0.154, 3.90mm Width). D flip flop is embedded in the Tape & Reel (TR) package. The output it is configured with uses Tri-State, Non-Inverted. The trigger it is configured with uses Positive Edge. This electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 4.75V~5.25V. The operating temperature is -40°C~85°C TA. The type of this D latch is D-Type. It is a type of FPGA belonging to the 74FCT series. Its output frequency should not exceed 250MHz. D latch consists of 1 elements. It consumes 200?A of quiescent current without being affected by external factors. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. JK flip flop belongs to 74FCT374 family. It is powered from a supply voltage of 5V. The input capacitance of this T flip flop is 5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. This D flip flop belongs to the family of FCT. This electronic part is mounted in the way of Surface Mount. It is designed with 20 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This part is included in FF/Latches. This flip flop is designed with 8 Bits. 8 circuits are used to achieve its superior flexibility. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. It operates from 5V power supplies. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The supply voltage should be maintained at 5V for high efficiency. The output current of 64mA makes it feature maximum design flexibility. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to ?1? and are available to encode either a decimal or hexadecimal input pattern to typically a binary or ?B. C. D? (binary coded decimal) output code.