CY74FCT162823CTPVC-TI-Price, Stock & Datasheet

CY74FCT162823CTPVC Overview

The flip flop is packaged in 56-BSSOP (0.295, 7.50mm Width). Package Tubeembeds it. As configured, the output uses Tri-State, Non-Inverted. In the configuration of the trigger, Positive Edgeis used. There is an electrical part that is mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. It is operating at -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. FPGAs belonging to the 74FCTseries contain this type of chip. In total, there are 2 elements. There is a consumption of 500?Aof quiescent energy. Currently, there are 56 terminations. The 74FCT162823family includes it. The D flip flop is powered by a voltage of 5V . This JK flip flop has a 4.5pFfarad input capacitance. Devices in the FCTfamily are electronic devices. A part of the electronic system is mounted in the way of Surface Mount. This board is designed with 56pins on it. This device has Positive Edgeas its clock edge trigger type. There is a base part number FF/Latchesfor the RS flip flops. An electronic part designed with 18bits is used in this application. It runs on 5Vvolts of power. A D flip flop with 2embedded ports is available. If high efficiency is desired, the supply voltage should be kept at 5V. With a current output of 24mA , it offers maximum design flexibility. It has 9 output lines to operate.