TI CDCF5801DBQR

CDCF5801DBQR Overview

Tape & Reel (TR)-method packaging is used for clock ICs. The 24-SSOP (0.154, 3.90mm Width) package contains this clock generator. This clock generator ic can sustain a maximum temperature of 260 during reflowing. It contains 24 terminations that can be found in frequency synthesizer. This electronic frequency generator requires a voltage of 3.3V. The input of this clock generator is designed to be HSTL, LVPECL, LVTTL. To access the full performance of the electronic component, 1 circuits are implemented. There is a maximum frequency of 280MHz Max with this clock-based frequency generator. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. This clock generator would require a maximum supply voltage of 3.6V. For safety reasons, this frequency synthesizer should have a voltage supply above 3V. As far as the supply voltage is concerned, clock PLL can be used with 3V~3.6V. Based on the test statistics, an ambient temperature of -40°C~85°C should be set. As the name suggests, this is a clock generator that is compatible with HSTL, LVDS, LVPECL, LVTTL, SSTL logic levels. This electronic component is usually classified as a PLL Multiplier/Divider component. The clock-generating IC is a 24-bit device designed specifically for microprocessors. You can find related electrical components to the base part number CDCF5801. It is possible to connect to the frequency generators via 24 pins. There is a maximum supply voltage of 3.3V that clock generator can handle. This clock generator can be classified as a kind of Clock Drivers in general. This clock PLL features DIFFERENTIAL/SINGLE-ENDED OUTPUT AVAILABLE for better clock signal output. This clock generator ic is ideally suited to the TR package.

CDCF5801DBQR Features

Available in the 24-SSOP (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

CDCF5801DBQR Applications

There are a lot of Texas Instruments
CDCF5801DBQR Clock Generators applications.

• Automatic test equipment
• Wide area power system
• Digital circuits
• Wireless base station for LTE, LTE-advanced
• Picocells, femtocells and small cells
• Sampling clocks for ADC and DAC
• 1 Gigabit Ethernet
• 10 Gigabit Ethernet
• FPGA and processor clocks
• Line cards used in telephone exchange