TI CDC2510APWR

Manufacturer No:

CDC2510APWR

Manufacturer:

Package:

24-TSSOP (0.173, 4.40mm Width)

Description:

3.3V PLL Clock Driver CDC2510 Clock Generators 24 Pins 24-TSSOP (0.173, 4.40mm Width) 24 Terminals Surface Mount 3V~3.6V Cut Tape (CT)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

CDC2510APWR information

TI CDC2510APWR technical specifications, attributes, parameters and parts with similar specifications to TI CDC2510APWR.

Type
Parameter

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
24-TSSOP (0.173, 4.40mm Width)

Number of Pins
24

Weight
89.499445mg

Operating Temperature
0°C~70°C

Packaging
Cut Tape (CT)

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
24

Type
PLL Clock Driver

Voltage - Supply
3V~3.6V

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
NOT SPECIFIED

Number of Functions
1

Supply Voltage
3.3V

Terminal Pitch
0.65mm

Frequency
100MHz

Time@Peak Reflow Temperature-Max (s)
NOT SPECIFIED

Base Part Number
CDC2510

Pin Count
24

Number of Outputs
10

Qualification Status
Not Qualified

Supply Voltage-Max (Vsup)
3.6V

Supply Voltage-Min (Vsup)
3V

Number of Circuits
1

Nominal Supply Current
10?A

Output Characteristics
SERIES-RESISTOR

Input
Clock

Ratio - Input:Output
1:10

PLL
Yes with Bypass

Differential - Input:Output
No/No

Same Edge Skew-Max (tskwd)
0.2 ns

Length
7.8mm

Width
4.4mm

RoHS Status
RoHS Compliant

Lead Free
Lead Free

Download datasheets and manufacturer documentation for TI CDC2510APWR.

Datasheets:

texasinstruments-cdc2510apwrg4-datasheets-9127.pdf

CDC2510APWR Overview

In order to package it as a clock IC, the Cut Tape (CT) package is used. A Clock PLL is included with the 24-TSSOP (0.173, 4.40mm Width) package. Frequency generator can maintain a maximum temperature of NOT SPECIFIED under reflowing conditions. As a result of this, we can find 24 terminations. Clock generator ics require a voltage of 3.3V. As the Clock PLL's input, Clock is designed to be used in order to generate the clock signal. It is possible to access the full performance of the electrical part by implementing 1 circuits. Surface Mount-slots make it easy to mount this electronic component on panels. It would take a maximum supply voltage of 3.6V to operate this time clock generator. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 3V. Clock generator ic works with 3V~3.6V. By calculating the test statistics, 0°C~70°C is the appropriate ambient temperature. PLL Clock Driver is the type of electrical part that this component is classified as. It is a 24-bit IC that is designed for microprocessors specifically. Related electrical parts can be found for the base part number CDC2510. The clock PLL has 24 pins that are available. In terms of the supply voltage, PLL clock can handle 3.3V volts. The frequency synthesizer features 10 signal outputs to ensure as high a frequency as possible. As a result of this digital clock generator, there is a low timing skew at 0.2 ns max. At frequencies of 100MHz, RF synthesizer achieves high efficiency.

CDC2510APWR Features

Available in the 24-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

CDC2510APWR Applications

There are a lot of Texas Instruments
CDC2510APWR Clock Generators applications.

10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems
Medical equipment
Multi-function printers
Media broadcast servers
Test equipment

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.