TI CDC2509PWR

Manufacturer No:

CDC2509PWR

Manufacturer:

Package:

24-TSSOP (0.173, 4.40mm Width)

Description:

3.3V PLL Clock Driver CDC2509 Clock Generators 24 Pins 24-TSSOP (0.173, 4.40mm Width) 24 Terminals Surface Mount 3V~3.6V Tape & Reel (TR)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

CDC2509PWR information

TI CDC2509PWR technical specifications, attributes, parameters and parts with similar specifications to TI CDC2509PWR.

Type
Parameter

Contact Plating
Gold

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
24-TSSOP (0.173, 4.40mm Width)

Number of Pins
24

Weight
89.499445mg

Operating Temperature
0°C~70°C

Packaging
Tape & Reel (TR)

JESD-609 Code
e4

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
24

Type
PLL Clock Driver

Subcategory
Clock Drivers

Voltage - Supply
3V~3.6V

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
1

Supply Voltage
3.3V

Terminal Pitch
0.65mm

Frequency
125MHz

Base Part Number
CDC2509

Pin Count
24

Operating Supply Voltage
3.3V

Supply Voltage-Max (Vsup)
3.6V

Supply Voltage-Min (Vsup)
3V

Number of Circuits
1

Nominal Supply Current
10?A

Power Dissipation
700mW

Quiescent Current
10?A

Output Characteristics
SERIES-RESISTOR

Input
LVTTL

Ratio - Input:Output
1:9

PLL
Yes with Bypass

Differential - Input:Output
No/No

Same Edge Skew-Max (tskwd)
0.2 ns

Length
7.8mm

Width
4.4mm

Radiation Hardening
No

RoHS Status
RoHS Compliant

Lead Free
Lead Free

Download datasheets and manufacturer documentation for TI CDC2509PWR.

CDC2509PWR Overview

As a clock IC, it uses the Tape & Reel (TR) package. 24-TSSOP (0.173, 4.40mm Width) contains this Clock PLL. When reflowed, this frequency generator can withstand a maximum temperature of 260. As a result, frequency synthesizers can be found to contain 24 terminations. For this clock generator ic, a voltage of 3.3V is required. This Clock PLL will be fed by LVTTL as its input. There are 1 circuits implemented in order to achieve full performance from this electronic part. The Surface Mount allows this electrical component to be easily installed on the panel. It would be possible to supply this clock PLL with 3.6V of power. For safety reasons, this frequency generator's supply voltage should remain above 3V. There are 3V~3.6V different supply voltages that can be provided for this RF synthesizer. Based on test statistics, ambient temperature should be set at 0°C~70°C. This is an electronic part that can be classified as a PLL Clock Driver in this case. In particular, this clock PLL is designed to be used with microprocessors. CDC2509 is the base part number for finding related electronic parts. There is a 24 pin that is available on the digital clock generator. The maximum supply voltage that clock generator can handle is 3.3V. Clock Drivers-type frequency generators are usually classified as this type. 9 signal outputs allow for maximi9ation of output frequency. At 0.2 ns Max, this analog clock generator exhibits low timing skew. At a frequency of 125MHz, the system can achieve high efficiency.

CDC2509PWR Features

Available in the 24-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

CDC2509PWR Applications

There are a lot of Texas Instruments
CDC2509PWR Clock Generators applications.

Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems
Medical equipment
Multi-function printers

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.