CD74HC4016MT-TI-Price, Stock & Datasheet

CD74HC4016MT Overview

This electronic part is conveniently packaged in 14-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). A switch device like this is mounted in Surface Mount. 1:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of -55°C~125°C TA degrees Celsius. In total, there have been 14 terminations. A 4 channel electronic part produces high-quality output. A 4.5V voltage supply should turn on and run the electronic component. An injection of 14 pins is performed into the body of the electrical component. Unlike digital switches, these are based on SPST - NO switching circuits. Try searching for 74HC4016 variants of the analog switch ic. Analog switches have 170Ohm internal resistance. To find out what the 14 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Users should never supply a voltage higher than 10V to a switch device. Analog switch ics with Single supply type are cost-effective. There should be 2V voltage fed to the electrical part below 2V. A voltage of 2V~10V is required for this switch device, which drains from a single voltage source. The switch multiplexer may be damaged if it is exposed to voltage greater than 16?A. In 200MHz-bandwidths, data can be transferred. Resistivity from Drain to Source is 320Ohm for this electronic part.