INFINEON BTS133TCBUMA1

Manufacturer No:

BTS133TCBUMA1

Manufacturer:

INFINEON

Package:

TO-263-3, D2Pak (2 Leads + Tab), TO-263AB

Description:

N-Channel 2.54mm PMIC HITFET® Series BTS133 3 Pin TO-263-3, D2Pak (2 Leads + Tab), TO-263AB

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

BTS133TCBUMA1 information

INFINEON BTS133TCBUMA1 technical specifications, attributes, parameters and parts with similar specifications to INFINEON BTS133TCBUMA1.

Type
Parameter

Factory Lead Time
18 Weeks

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
TO-263-3, D2Pak (2 Leads + Tab), TO-263AB

Number of Pins
3

Operating Temperature
-40°C~150°C TJ

Packaging
Tape & Reel (TR)

Series
HITFET®

Published
2009

JESD-609 Code
e3

Pbfree Code
yes

Part Status
Active

Moisture Sensitivity Level (MSL)
3 (168 Hours)

Number of Terminations
2

ECCN Code
EAR99

Terminal Finish
Tin (Sn)

Additional Feature
SEATED HGT-NOM; SEATED HGT-CALCULATED

Terminal Position
SINGLE

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
NOT SPECIFIED

Number of Functions
1

Terminal Pitch
2.54mm

Reach Compliance Code
not_compliant

Time@Peak Reflow Temperature-Max (s)
NOT SPECIFIED

Pin Count
4

JESD-30 Code
R-PSSO-G2

Number of Outputs
1

Output Voltage
60V

Output Type
N-Channel

Interface
On/Off

Output Configuration
Low Side

Power Dissipation
90W

Output Current
7A

Voltage - Supply (Vcc/Vdd)
Not Required

Input Type
Non-Inverting

Switch Type
General Purpose

Halogen Free
Not Halogen Free

Drain to Source Voltage (Vdss)
60V

Nominal Input Voltage
10V

Ratio - Input:Output
1:1

Voltage - Load
60V Max

Max Dual Supply Voltage
60V

Fault Protection
Current Limiting (Fixed), Over Temperature, Over Voltage

Output Peak Current Limit-Nom
7A

Rds On (Typ)
40m Ω

Built-in Protections
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL

Height Seated (Max)
4.5mm

Download datasheets and manufacturer documentation for INFINEON BTS133TCBUMA1.

BTS133TCBUMA1 Overview

It is packaged in the form of a Tape & Reel (TR).It is included with the TO-263-3, D2Pak (2 Leads + Tab), TO-263AB package as well.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The lighting driver has a total of 1 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of N-Channel volts can be obtained with this LED driver.As you can see, it comes from the BTS133 family.A total of 2 terminations can be found in it.During operation, the 3 pins are used.It is important to note that the LED driving board has 1 functions.Surface Mount is mounted in the way of this LED driving board.This LED driver is equipped with a total of 4 pins.It is included in the HITFET® series.This results in a 7A output current.In addition, SEATED HGT-NOM; SEATED HGT-CALCULATED can be produced using this LED driving board.

BTS133TCBUMA1 Features

Additional features like SEATED HGT-NOM; SEATED HGT-CALCULATED

BTS133TCBUMA1 Applications

There are a lot of Infineon Technologies
BTS133TCBUMA1 Power Switches ICs applications.

Wireless/Networking Cards
Low Voltage I/O System Power
Hard Disk Drives
Solid-State Drives
Hot Swap
HDD and SSD
Hot Swap
Wireless Modem Data Cards
PC Cards
HDD, SSD

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.