INFINEON BTN8980TAAUMA1

Manufacturer No:

BTN8980TAAUMA1

Manufacturer:

INFINEON

Package:

TO-263-8, D2Pak (7 Leads + Tab), TO-263CA

Description:

Tape & Reel (TR) TO-263-8, D2Pak (7 Leads + Tab), TO-263CA Logic 6V~40V Surface Mount -40°C~150°C TJ DC Motors, General Purpose Half Bridge Inductive 6V~40V

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

BTN8980TAAUMA1 information

INFINEON BTN8980TAAUMA1 technical specifications, attributes, parameters and parts with similar specifications to INFINEON BTN8980TAAUMA1.

Type
Parameter

Factory Lead Time
16 Weeks

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
TO-263-8, D2Pak (7 Leads + Tab), TO-263CA

Number of Pins
7

Usage Level
Automotive grade

Operating Temperature
-40°C~150°C TJ

Packaging
Tape & Reel (TR)

Series
NovalithIC™

Published
2013

JESD-609 Code
e3

Part Status
Last Time Buy

Moisture Sensitivity Level (MSL)
3 (168 Hours)

Number of Terminations
7

ECCN Code
EAR99

Terminal Finish
Matte Tin (Sn)

Applications
DC Motors, General Purpose

Additional Feature
SEATED HGT-NOM; SEATED HGT-CALCULATED

Voltage - Supply
6V~40V

Terminal Position
SINGLE

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
NOT SPECIFIED

Number of Functions
1

Supply Voltage
13.5V

Time@Peak Reflow Temperature-Max (s)
NOT SPECIFIED

Pin Count
4

Number of Outputs
1

Max Output Current
117A

Operating Supply Voltage
40V

Interface
Logic

Output Configuration
Half Bridge

Halogen Free
Halogen Free

Output Current per Channel
50A

Voltage - Load
6V~40V

Fault Protection
Current Limiting, Over Temperature, Short Circuit, UVLO

Turn On Time
40 μs

Output Peak Current Limit-Nom
77A

Rds On (Typ)
4.7m Ω LS, 5.3m Ω HS

Turn Off Time
24 μs

Built-in Protections
TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE

Output Current Flow Direction
SOURCE SINK

Load Type
Inductive

Features
Latch Function, Slew Rate Controlled, Status Flag

Height Seated (Max)
4.5mm

Width
9.25mm

RoHS Status
RoHS Compliant

Lead Free
Contains Lead

Download datasheets and manufacturer documentation for INFINEON BTN8980TAAUMA1.

BTN8980TAAUMA1 Overview

To package H bridge, use Tape & Reel (TR).In an effort to save money, H bridge is included in the TO-263-8, D2Pak (7 Leads + Tab), TO-263CA package.With the 6V~40V supply voltage, improved reliabilbridge drivery can be achieved.There is a mounting of H bridge circuit in Surface Mount.As long as -40°C~150°C TJ operates at the right temperature, motor driver H bridge will operate normally.H bridge motor driver has many applications, including DC Motors, General Purpose.The PCB is mounted wH gateh Surface Mount.It is possible to terminate a transmission line with a 7 termination using the H bridge which matches the characteristic impedance of the transmission line.It is used as a pronged contact as H bridge ic of a signal interface when 7 pins are used.This H bridge operates with a voltage of 13.5V.Basically, it is an electronic H-bridge that belongs to the NovalithIC™ series.An ambient temperature of 117A determines the maximum load current that a power supply can deliver.It is made up of two 4 pins that work together to perform the specific functions of this bridge driver.There is a 1 output on it.For the highest level of efficiency, the operating supply voltage is kept at 40V.As well as [X], H-bridge is capable of providing SEATED HGT-NOM; SEATED HGT-CALCULATED.

BTN8980TAAUMA1 Features

Available in TO-263-8, D2Pak (7 Leads + Tab), TO-263CA Package / Case
Operating Temperature at the range of Surface Mount
Number of Receivers: 40V
With SEATED HGT-NOM; SEATED HGT-CALCULATED Drivers

BTN8980TAAUMA1 Applications

There are a lot of Infineon Technologies
BTN8980TAAUMA1 Full Bridge Drivers, Half-Bridge Drivers applications.

DC-DC Converters
Desktop Computers
V-Core
Non-V-Core
Workstations
High-Current DC-DC Point-of-Load Converters
Networking Microprocessor Voltage Regulators
Telecom Microprocessor
Voltage Regulators
Small Form-Factor Voltage Regulator Modules

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.