INFINEON BTF3050TEATMA1

Manufacturer No:

BTF3050TEATMA1

Manufacturer:

INFINEON

Package:

TO-252-5, DPak (4 Leads + Tab), TO-252AD

Description:

N-Channel PMIC 5 Pin 5V TO-252-5, DPak (4 Leads + Tab), TO-252AD

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

BTF3050TEATMA1 information

INFINEON BTF3050TEATMA1 technical specifications, attributes, parameters and parts with similar specifications to INFINEON BTF3050TEATMA1.

Type
Parameter

Factory Lead Time
18 Weeks

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
TO-252-5, DPak (4 Leads + Tab), TO-252AD

Number of Pins
5

Weight
329.988449mg

Usage Level
Automotive grade

Operating Temperature
-40°C~150°C TJ

Packaging
Tape & Reel (TR)

Published
2014

Pbfree Code
yes

Part Status
Active

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
4

Resistance
100mOhm

Terminal Position
SINGLE

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
NOT SPECIFIED

Number of Functions
1

Supply Voltage
5V

Reach Compliance Code
not_compliant

Time@Peak Reflow Temperature-Max (s)
NOT SPECIFIED

JESD-30 Code
R-PSSO-G4

Number of Outputs
1

Output Type
N-Channel

Max Output Current
3A

Supply Voltage-Min (Vsup)
3V

Interface
On/Off

Nominal Supply Current
2.5mA

Output Configuration
Low Side

Voltage - Supply (Vcc/Vdd)
Not Required

Input Type
Non-Inverting

Switch Type
General Purpose

Halogen Free
Halogen Free

Drain to Source Voltage (Vdss)
40V

Nominal Input Voltage
5.5V

Ratio - Input:Output
1:1

Voltage - Load
40V Max

Max Dual Supply Voltage
40V

Fault Protection
Current Limiting (Fixed), Over Temperature, Over Voltage

Output Peak Current Limit-Nom
3A

Rds On (Typ)
40m Ω

Turn Off Time
30 μs

Built-in Protections
OVER VOLTAGE; THERMAL; TRANSIENT

Output Current Flow Direction
SINK

Features
Slew Rate Controlled

Width
6.22mm

Download datasheets and manufacturer documentation for INFINEON BTF3050TEATMA1.

BTF3050TEATMA1 Overview

It is packaged in the manner of a Tape & Reel (TR).There is a TO-252-5, DPak (4 Leads + Tab), TO-252AD package that includes it.In this case, the LED driving board is mounted as Surface Mount.This switch is of type General Purpose.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.There are 1 outputs available on this lighting driver.Operation is based on a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.It consists of 4 terminations in total.In order to operate, the 5 pins are used.It consists of 1 functions.In order to meet the operation criteria, the maximum output current drops to 3A.The supply voltage of 5V is conducive to high efficiency.As a result, it is mounted in the manner of Surface Mount.In this LED driving board, there is 100mOhm resistance.In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 3V.

BTF3050TEATMA1 Features

Supplied from 5V
Resistance of 100mOhm

BTF3050TEATMA1 Applications

There are a lot of Infineon Technologies
BTF3050TEATMA1 Power Switches ICs applications.

Portable/Handheld Devices
Wireless/Networking Cards
Low Voltage I/O System Power
Hard Disk Drives
Solid-State Drives
Hot Swap
HDD and SSD
Hot Swap
Wireless Modem Data Cards
PC Cards

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.