ROHM BD82065FVJ-E2

Manufacturer No:

BD82065FVJ-E2

Manufacturer:

ROHM

Package:

8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Description:

5V N-Channel 0.65mm PMIC BD82065 8 Pin 5V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

BD82065FVJ-E2 information

ROHM BD82065FVJ-E2 technical specifications, attributes, parameters and parts with similar specifications to ROHM BD82065FVJ-E2.

Type
Parameter

Factory Lead Time
8 Weeks

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Number of Pins
8

Operating Temperature
-40°C~85°C TA

Packaging
Tape & Reel (TR)

Published
2012

Feature
Slew Rate Controlled, Status Flag

Pbfree Code
yes

Part Status
Active

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Resistance
110mOhm

Subcategory
Peripheral Drivers

Max Power Dissipation
580mW

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
NOT SPECIFIED

Number of Functions
1

Supply Voltage
5V

Terminal Pitch
0.65mm

Current Rating
2.4A

Base Part Number
BD82065

Pin Count
8

Number of Outputs
1

Qualification Status
Not Qualified

Output Type
N-Channel

Max Output Current
1.5A

Power Supplies
5V

Supply Voltage-Min (Vsup)
2.7V

Interface
On/Off

Output Configuration
High Side

Voltage - Supply (Vcc/Vdd)
Not Required

Input Type
Non-Inverting

Turn On Delay Time
1.1 ms

Switch Type
USB Switch

Nominal Input Voltage
5.5V

Turn-Off Delay Time
10 ?s

Ratio - Input:Output
1:1

Voltage - Load
2.7V~5.5V

Driver Number of Bits
1

Fault Protection
Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO

Turn On Time
20000 µs

Output Peak Current Limit-Nom
1.5A

Rds On (Typ)
70m ?

Download datasheets and manufacturer documentation for ROHM BD82065FVJ-E2.

BD82065FVJ-E2 Overview

As a result, it is packaged in the form of a Tape & Reel (TR).This package is included in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).Mounting type Surface Mount is selected for the LED driving board.A USB Switch switch type is owned by it.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.The LED driver is equipped with 1 outputs.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It is equipped with Slew Rate Controlled, Status Flag features.It comes under the family of BD82065.A total of 8 terminations have been recorded.The operation is performed through the 8 pins.Currently, the lighting driver has a total of 1 functions.This operation requires the maximum output current to be decreased to 1.5A.High efficiency is possible when the supply voltage is set to 5V.Surface Mount is mounted in the way.8 pins are connected to it in total.Currently, the LED driving board has 110mOhm resistance.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.For normal operation, the supply voltage (Vsup) should be kept above 2.7V.This part has a power supply of 5V volts.

BD82065FVJ-E2 Features

Supplied from 5V
Resistance of 110mOhm

BD82065FVJ-E2 Applications

There are a lot of ROHM Semiconductor
BD82065FVJ-E2 Power Switches ICs applications.

PC Card Hot Swap
Storage Drives
Portable/Handheld Devices
Wireless/Networking Cards
Low Voltage I/O System Power
Hard Disk Drives
Solid-State Drives
Hot Swap
HDD and SSD
Hot Swap

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.