ROHM BD7562F-E2

Manufacturer No:

BD7562F-E2

Manufacturer:

ROHM

Package:

8-SOIC (0.173, 4.40mm Width)

Description:

2 Channels 1mA per Channel 1pA 45 dB Instrumentational OP Amps 7.25V 5V~14.5V ±2.5V~7.25V BD75* 8 Pins 8-SOIC (0.173, 4.40mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

BD7562F-E2 information

ROHM BD7562F-E2 technical specifications, attributes, parameters and parts with similar specifications to ROHM BD7562F-E2.

Type
Parameter

Factory Lead Time
9 Weeks

Contact Plating
Copper, Tin

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
8-SOIC (0.173, 4.40mm Width)

Number of Pins
8

Operating Temperature
-40°C~85°C

Packaging
Tape & Reel (TR)

Published
2003

Pbfree Code
yes

Part Status
Active

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Subcategory
Operational Amplifier

Packing Method
TAPE AND REEL

Technology
CMOS

Terminal Position
DUAL

Terminal Form
GULL WING

Number of Functions
2

Supply Voltage
12V

Base Part Number
BD75*

Pin Count
8

Output Type
Rail-to-Rail

Number of Channels
2

Operating Supply Current
900?A

Nominal Supply Current
1.3mA

Output Current
8mA

Slew Rate
1V/?s

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
General Purpose

Common Mode Rejection Ratio
45 dB

Current - Input Bias
1pA

Voltage - Supply, Single/Dual (±)
5V~14.5V ±2.5V~7.25V

Output Current per Channel
1mA

Input Offset Voltage (Vos)
1mV

Bandwidth
1MHz

Unity Gain BW-Nom
1000 kHz

Voltage Gain
95dB

Low-Offset
NO

Frequency Compensation
YES

Low-Bias
YES

Micropower
YES

Dual Supply Voltage
5V

Height
1.5mm

Length
5mm

Width
4.4mm

Download datasheets and manufacturer documentation for ROHM BD7562F-E2.

BD7562F-E2 Overview

Packaged in a 8-SOIC (0.173, 4.40mm Width) case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. The op amp is delivered to you in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 12V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 1mV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . As long as the supply current of the chip does not exceed 900?A, this op amp ic can operate. 95dB should remain the voltage gain. As far as the device is concerned, buffer amplifier has 2 channels. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 7.25V. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted.

BD7562F-E2 Features

8 Pins
supply voltage of 12V
95dB voltage gain
Output Type: Rail-to-Rail

BD7562F-E2 Applications

There are a lot of ROHM Semiconductor
BD7562F-E2 Instrumentational OP Amps applications.

Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.