ROHM BD6886GUL-E2

Manufacturer No:

BD6886GUL-E2

Manufacturer:

ROHM

Package:

15-UFBGA, CSPBGA

Description:

Tape & Reel (TR) 15-UFBGA, CSPBGA Logic 2.5V~5.5V Surface Mount -25°C~150°C TJ DC Motors, General Purpose Half Bridge (2) Inductive 2.5V~5.5V

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

BD6886GUL-E2 information

ROHM BD6886GUL-E2 technical specifications, attributes, parameters and parts with similar specifications to ROHM BD6886GUL-E2.

Type
Parameter

Factory Lead Time
10 Weeks

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
15-UFBGA, CSPBGA

Number of Pins
6

Operating Temperature
-25°C~150°C TJ

Packaging
Tape & Reel (TR)

Published
2005

Pbfree Code
yes

Part Status
Not For New Designs

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
15

ECCN Code
EAR99

Applications
DC Motors, General Purpose

Subcategory
Motion Control Electronics

Max Power Dissipation
730mW

Technology
Power MOSFET

Voltage - Supply
2.5V~5.5V

Terminal Position
BOTTOM

Terminal Form
BALL

Number of Functions
1

Supply Voltage
5V

Terminal Pitch
0.5mm

Base Part Number
BD6886

Number of Outputs
1

Operating Supply Voltage
3V

Supply Voltage-Max (Vsup)
5.5V

Power Supplies
35V

Supply Voltage-Min (Vsup)
2.5V

Interface
Logic

Analog IC - Other Type
VOICE COIL MOTOR CONTROLLER

Output Configuration
Half Bridge (2)

Output Current
200mA

Voltage - Load
2.5V~5.5V

Current - Output / Channel
150mA

Fault Protection
Over Temperature, UVLO

Rds On (Typ)
800m ?

Load Type
Inductive

Height Seated (Max)
0.55mm

Radiation Hardening
No

RoHS Status
RoHS Compliant

Download datasheets and manufacturer documentation for ROHM BD6886GUL-E2.

BD6886GUL-E2 Overview

In order to package H bridge, Tape & Reel (TR) is used.H bridge is included in the 15-UFBGA, CSPBGA package as a cost-saving measure.Based on the supply voltage of 2.5V~5.5V, improved reliabilbridge drivery can be ensured.H bridge circuit is put into place in the way of Surface Mount.Motor driver H bridge is possible for -25°C~150°C TJ to operate normally at motor driver H bridges operating temperature.There are lots of uses for H bridge motor driver, including DC Motors, General Purpose.On the PCB H gate is mounted using Surface Mount.To terminate a transmission line with the H bridge whose characteristic impedance matches the line, 15 terminations are employed.Signal interfaces include 6 pins that serve as pronged contacts.The base H bridge ic number of BD6886 allows you to find more related H bridge ics by using that number.To operate H bridge circuit, a voltage supply of 5V is required.H bridge circuit contains an analog IC type VOICE COIL MOTOR CONTROLLER.The power supply pins and the output pins are conducting a current of 200mA.It is through the 15 pins that the bridge driver can perform its specific functions.The output of this Hbridge is 1.There are many similarities between this H bridge motor driver and other components in the subcategory of Motion Control Electronics.The operating supply voltage is maintained at 3V in order to ensure high efficiency.There is a supply of electricity from 35V to the electrical load.

BD6886GUL-E2 Features

Available in 15-UFBGA, CSPBGA Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : BD6886
Number of Receivers: 3V

BD6886GUL-E2 Applications

There are a lot of ROHM Semiconductor
BD6886GUL-E2 Full Bridge Drivers, Half-Bridge Drivers applications.

Desktop Computers
V-Core
Non-V-Core
Workstations
High-Current DC-DC Point-of-Load Converters
Networking Microprocessor Voltage Regulators
Telecom Microprocessor
Voltage Regulators
Small Form-Factor Voltage Regulator Modules
Notebook Computers

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.