ROHM BD6522F-E2

Manufacturer No:

BD6522F-E2

Manufacturer:

ROHM

Package:

8-SOIC (0.173, 4.40mm Width)

Description:

5V N-Channel PMIC BD652* 8 Pin 5V 8-SOIC (0.173, 4.40mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

BD6522F-E2 information

ROHM BD6522F-E2 technical specifications, attributes, parameters and parts with similar specifications to ROHM BD6522F-E2.

Type
Parameter

Factory Lead Time
8 Weeks

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
8-SOIC (0.173, 4.40mm Width)

Number of Pins
8

Operating Temperature
-25°C~85°C TA

Packaging
Tape & Reel (TR)

Published
2008

Feature
Load Discharge, Slew Rate Controlled

Pbfree Code
yes

Part Status
Active

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

Termination
SMD/SMT

ECCN Code
EAR99

Resistance
50mOhm

Subcategory
Power Management Circuits

Max Power Dissipation
560mW

Terminal Position
DUAL

Terminal Form
GULL WING

Number of Functions
1

Supply Voltage
5V

Base Part Number
BD652*

Pin Count
8

Output Voltage
6V

Output Type
N-Channel

Max Output Current
2A

Power Supplies
5V

Number of Channels
1

Voltage
3V

Interface
On/Off

Analog IC - Other Type
POWER SUPPLY SUPPORT CIRCUIT

Nominal Supply Current
110?A

Output Configuration
High Side

Power Dissipation
560mW

Output Current
2A

Voltage - Supply (Vcc/Vdd)
Not Required

Adjustable Threshold
NO

Input Type
Non-Inverting

Max Output Voltage
6V

Switch Type
General Purpose

Min Input Voltage
3V

Max Input Voltage
5.5V

Supply Current-Max (Isup)
0.22mA

Nominal Input Voltage
5.5V

Ratio - Input:Output
1:1

Voltage - Load
3V~5.5V

Download datasheets and manufacturer documentation for ROHM BD6522F-E2.

BD6522F-E2 Overview

The package is in the form of a Tape & Reel (TR).It is included in the package 8-SOIC (0.173, 4.40mm Width).The lighting driver is mounted in the Surface Mount position.General Purpose is the type of switch owned by it.Ensure reliable operation by setting the temperature to -25°C~85°C TA.The LED driver has a total of 1 outputs.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.Currently, the LED driving board is equipped with Load Discharge, Slew Rate Controlled features.It is part of the BD652* family of LED drivers.It contains 8 terminations.It is necessary to use the 8 pins in order to operate the LED driver.Currently, there are 1 functions associated with the lighting driver.This results in the maximum output current dropping to 2A to meet the operation criteria.The supply voltage can be 5V for high efficiency.The lighting driver is mounted in the direction of Surface Mount.A total of 8 pins are present on it.Lighting drivers with 50mOhm resistance are used.This case results in a 2A output current.A container with a capacity of Power Management Circuits contains this self-contained lighting driver.In this case, the analog IC in this gadget is POWER SUPPLY SUPPORT CIRCUIT.You can select from 1 channels.In this part, the power supply is set to 5V.There is a maximum input voltage of 5.5V volts.The input voltage minimum is 3V volts.It operates at a maximum supply current of 0.22mA.

BD6522F-E2 Features

Supplied from 5V
Resistance of 50mOhm
1 channels

BD6522F-E2 Applications

There are a lot of ROHM Semiconductor
BD6522F-E2 Power Switches ICs applications.

Telecom and Network Systems
PC Card Hot Swap
Storage Drives
Portable/Handheld Devices
Wireless/Networking Cards
Low Voltage I/O System Power
Hard Disk Drives
Solid-State Drives
Hot Swap
HDD and SSD

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.