ROHM BD6220F-E2

Manufacturer No:

BD6220F-E2

Manufacturer:

ROHM

Package:

8-SOIC (0.173, 4.40mm Width)

Description:

Tape & Reel (TR) 8-SOIC (0.173, 4.40mm Width) Logic 6V~15V Surface Mount -40°C~85°C TA DC Motors, General Purpose Half Bridge (2) Inductive 6V~15V

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

BD6220F-E2 information

ROHM BD6220F-E2 technical specifications, attributes, parameters and parts with similar specifications to ROHM BD6220F-E2.

Type
Parameter

Factory Lead Time
10 Weeks

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
8-SOIC (0.173, 4.40mm Width)

Number of Pins
8

Operating Temperature
-40°C~85°C TA

Packaging
Tape & Reel (TR)

Published
2005

JESD-609 Code
e3

Pbfree Code
yes

Part Status
Active

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

Termination
SMD/SMT

ECCN Code
EAR99

Terminal Finish
Tin (Sn)

Applications
DC Motors, General Purpose

Subcategory
Motion Control Electronics

Technology
Power MOSFET

Voltage - Supply
6V~15V

Terminal Position
DUAL

Terminal Form
GULL WING

Number of Functions
1

Supply Voltage
12V

Pin Count
8

Number of Outputs
1

Supply Voltage-Min (Vsup)
6V

Interface
Logic

Analog IC - Other Type
BRUSH DC MOTOR CONTROLLER

Nominal Supply Current
2.5mA

Output Configuration
Half Bridge (2)

Output Current
500mA

Collector Emitter Voltage (VCEO)
18V

Max Collector Current
500mA

Voltage - Load
6V~15V

Fault Protection
Current Limiting, Over Temperature, Over Voltage, UVLO

Rds On (Typ)
1.5 ?

Motor Type
Brushed

Load Type
Inductive

Height
1.5mm

Length
5mm

Width
4.4mm

REACH SVHC
Unknown

Radiation Hardening
No

RoHS Status
RoHS Compliant

Lead Free
Lead Free

Download datasheets and manufacturer documentation for ROHM BD6220F-E2.

BD6220F-E2 Overview

In order to package H bridge, Tape & Reel (TR) is used.H bridge is included in the 8-SOIC (0.173, 4.40mm Width) package as a cost-saving measure.Based on the supply voltage of 6V~15V, improved reliabilbridge drivery can be ensured.H bridge circuit is put into place in the way of Surface Mount.Motor driver H bridge is possible for -40°C~85°C TA to operate normally at motor driver H bridges operating temperature.There are lots of uses for H bridge motor driver, including DC Motors, General Purpose.On the PCB H gate is mounted using Surface Mount.To terminate a transmission line with the H bridge whose characteristic impedance matches the line, 8 terminations are employed.Signal interfaces include 8 pins that serve as pronged contacts.The base H bridge ic number of BD622* allows you to find more related H bridge ics by using that number.To operate H bridge circuit, a voltage supply of 12V is required.H bridge circuit contains an analog IC type BRUSH DC MOTOR CONTROLLER.The power supply pins and the output pins are conducting a current of 500mA.It is through the 8 pins that the bridge driver can perform its specific functions.The output of this Hbridge is 1.There are many similarities between this H bridge motor driver and other components in the subcategory of Motion Control Electronics.

BD6220F-E2 Features

Available in 8-SOIC (0.173, 4.40mm Width) Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : BD622*

BD6220F-E2 Applications

There are a lot of ROHM Semiconductor
BD6220F-E2 Full Bridge Drivers, Half-Bridge Drivers applications.

Desktop Computers
V-Core
Non-V-Core
Workstations
High-Current DC-DC Point-of-Load Converters
Networking Microprocessor Voltage Regulators
Telecom Microprocessor
Voltage Regulators
Small Form-Factor Voltage Regulator Modules
Notebook Computers

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.