ROHM BD2202G-TR

Manufacturer No:

BD2202G-TR

Manufacturer:

ROHM

Package:

SC-74A, SOT-753

Description:

3/3.3V N-Channel PMIC BD220* 5 Pin 3.3V SC-74A, SOT-753

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

BD2202G-TR information

ROHM BD2202G-TR technical specifications, attributes, parameters and parts with similar specifications to ROHM BD2202G-TR.

Type
Parameter

Factory Lead Time
20 Weeks

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
SC-74A, SOT-753

Number of Pins
5

Operating Temperature
-25°C~85°C TA

Packaging
Tape & Reel (TR)

Published
2003

Pbfree Code
yes

Part Status
Active

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
5

Termination
SMD/SMT

ECCN Code
EAR99

Resistance
150mOhm

Subcategory
Peripheral Drivers

Max Power Dissipation
675mW

Terminal Position
DUAL

Terminal Form
GULL WING

Number of Functions
1

Supply Voltage
3.3V

Base Part Number
BD220*

Pin Count
5

Number of Outputs
1

Output Type
N-Channel

Max Output Current
400mA

Power Supplies
3/3.3V

Supply Voltage-Min (Vsup)
2.7V

Interface
On/Off

Nominal Supply Current
70?A

Output Configuration
High Side

Power Dissipation
675mW

Output Current
200mA

Voltage - Supply (Vcc/Vdd)
Not Required

Input Type
Non-Inverting

Turn On Delay Time
10 ms

Max Output Voltage
6.3V

Switch Type
General Purpose

Max Input Voltage
3.6V

Output Current per Channel
200mA

Nominal Input Voltage
3.6V

Turn-Off Delay Time
200 ?s

Ratio - Input:Output
1:1

Voltage - Load
2.7V~3.6V

Driver Number of Bits
1

Fault Protection
Current Limiting (Fixed), Over Temperature, UVLO

Output Peak Current Limit-Nom
0.2A

Download datasheets and manufacturer documentation for ROHM BD2202G-TR.

BD2202G-TR Overview

It is packaged in the form of a Tape & Reel (TR).It is included with the SC-74A, SOT-753 package as well.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -25°C~85°C TA.The lighting driver has a total of 1 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of N-Channel volts can be obtained with this LED driver.As you can see, it comes from the BD220* family.A total of 5 terminations can be found in it.During operation, the 5 pins are used.It is important to note that the LED driving board has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 400mA.It is possible to obtain high efficiency with a supply voltage of 3.3V.Surface Mount is mounted in the way of this LED driving board.This LED driver is equipped with a total of 5 pins.In this case, there is 150mOhm resistance in the LED driving board.This results in a 200mA output current.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.In order to operate normally, the supply voltage (Vsup) must remain above 2.7V.It has a power supply of 3/3.3V.The maximum input voltage of the LED driver is 3.6V volts.

BD2202G-TR Features

Supplied from 3.3V
Resistance of 150mOhm

BD2202G-TR Applications

There are a lot of ROHM Semiconductor
BD2202G-TR Power Switches ICs applications.

Wireless/Networking Cards
Low Voltage I/O System Power
Hard Disk Drives
Solid-State Drives
Hot Swap
HDD and SSD
Hot Swap
Wireless Modem Data Cards
PC Cards
HDD, SSD

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.