ROHM BD2051AFJ-E2

Manufacturer No:

BD2051AFJ-E2

Manufacturer:

ROHM

Package:

8-SOIC (0.154, 3.90mm Width)

Description:

5V N-Channel PMIC BD20*1A 8 Pin 5V 8-SOIC (0.154, 3.90mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

BD2051AFJ-E2 information

ROHM BD2051AFJ-E2 technical specifications, attributes, parameters and parts with similar specifications to ROHM BD2051AFJ-E2.

Type
Parameter

Factory Lead Time
8 Weeks

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
8-SOIC (0.154, 3.90mm Width)

Number of Pins
8

Operating Temperature
-40°C~85°C TA

Packaging
Tape & Reel (TR)

Published
2008

Feature
Status Flag

Pbfree Code
yes

Part Status
Active

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Resistance
100mOhm

Subcategory
Peripheral Drivers

Max Power Dissipation
560mW

Terminal Position
DUAL

Terminal Form
GULL WING

Number of Functions
1

Supply Voltage
5V

Current Rating
1A

Base Part Number
BD20*1A

Pin Count
8

Output Voltage
6V

Output Type
N-Channel

Max Output Current
500mA

Supply Voltage-Max (Vsup)
5.5V

Power Supplies
5V

Supply Voltage-Min (Vsup)
2.7V

Interface
On/Off

Nominal Supply Current
90?A

Output Configuration
High Side

Output Current
500mA

Voltage - Supply (Vcc/Vdd)
Not Required

Input Type
Non-Inverting

Output Power
560mW

Turn On Delay Time
20 ms

Switch Type
USB Switch

Turn-Off Delay Time
40 ?s

Ratio - Input:Output
1:1

Voltage - Load
2.7V~5.5V

Driver Number of Bits
1

Fault Protection
Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO

Turn On Time
20000 µs

Output Peak Current Limit-Nom
1A

Rds On (Typ)
80m ?

Download datasheets and manufacturer documentation for ROHM BD2051AFJ-E2.

BD2051AFJ-E2 Overview

It is packaged in the form of a Tape & Reel (TR).It is included with the 8-SOIC (0.154, 3.90mm Width) package as well.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is USB Switch.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The lighting driver has a total of 1 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of N-Channel volts can be obtained with this LED driver.There are Status Flag features available on the LED driving board.As you can see, it comes from the BD20*1A family.A total of 8 terminations can be found in it.During operation, the 8 pins are used.It is important to note that the LED driving board has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 500mA.It is possible to obtain high efficiency with a supply voltage of 5V.Surface Mount is mounted in the way of this LED driving board.This LED driver is equipped with a total of 8 pins.In this case, there is 100mOhm resistance in the LED driving board.This results in a 500mA output current.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.The maximum supply voltage for this lighting driver is set to 5.5V (Vsup).In order to operate normally, the supply voltage (Vsup) must remain above 2.7V.It has a power supply of 5V.

BD2051AFJ-E2 Features

Supplied from 5V
Resistance of 100mOhm

BD2051AFJ-E2 Applications

There are a lot of ROHM Semiconductor
BD2051AFJ-E2 Power Switches ICs applications.

Wireless/Networking Cards
Low Voltage I/O System Power
Hard Disk Drives
Solid-State Drives
Hot Swap
HDD and SSD
Hot Swap
Wireless Modem Data Cards
PC Cards
HDD, SSD

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.