ROHM BA6218

Manufacturer No:

BA6218

Manufacturer:

ROHM

Package:

9-SIP

Description:

Tube 9-SIP Logic 4.5V~15V Through Hole -20°C~60°C TA DC Motors, General Purpose Half Bridge (2) Inductive 4.5V~15V

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

BA6218 information

ROHM BA6218 technical specifications, attributes, parameters and parts with similar specifications to ROHM BA6218.

Type
Parameter

Mount
Through Hole

Mounting Type
Through Hole

Package / Case
9-SIP

Operating Temperature
-20°C~60°C TA

Packaging
Tube

Published
1999

JESD-609 Code
e2

Pbfree Code
yes

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
9

ECCN Code
EAR99

Terminal Finish
Tin/Copper (Sn/Cu)

Applications
DC Motors, General Purpose

Subcategory
Motion Control Electronics

Technology
Bipolar

Voltage - Supply
4.5V~15V

Terminal Position
SINGLE

Peak Reflow Temperature (Cel)
260

Number of Functions
1

Supply Voltage
9V

Terminal Pitch
2.54mm

Time@Peak Reflow Temperature-Max (s)
10

Base Part Number
BA6218

JESD-30 Code
R-PSIP-T9

Number of Outputs
1

Qualification Status
Not Qualified

Power Supplies
9V

Supply Voltage-Min (Vsup)
4.5V

Interface
Logic

Analog IC - Other Type
BRUSH DC MOTOR CONTROLLER

Output Configuration
Half Bridge (2)

Output Current
700mA

Supply Current-Max (Isup)
70mA

Voltage - Load
4.5V~15V

Load Type
Inductive

Height Seated (Max)
7.2mm

Width
2.8mm

RoHS Status
RoHS Compliant

Lead Free
Lead Free

Download datasheets and manufacturer documentation for ROHM BA6218.

Datasheets:

rohmsemiconductor-ba6218-datasheets-3437.pdf

rohm-ba6218-datasheets-6941.pdf

rohm-ba6218-datasheets-6942.pdf

BA6218 Overview

In order to package H bridge, Tube is used.H bridge is included in the 9-SIP package as a cost-saving measure.Based on the supply voltage of 4.5V~15V, improved reliabilbridge drivery can be ensured.H bridge circuit is put into place in the way of Through Hole.Motor driver H bridge is possible for -20°C~60°C TA to operate normally at motor driver H bridges operating temperature.There are lots of uses for H bridge motor driver, including DC Motors, General Purpose.On the PCB H gate is mounted using Through Hole.To terminate a transmission line with the H bridge whose characteristic impedance matches the line, 9 terminations are employed.The base H bridge ic number of BA6218 allows you to find more related H bridge ics by using that number.To operate H bridge circuit, a voltage supply of 9V is required.H bridge circuit contains an analog IC type BRUSH DC MOTOR CONTROLLER.The power supply pins and the output pins are conducting a current of 700mA.It is through the 9 pins that the bridge driver can perform its specific functions.The output of this Hbridge is 1.There are many similarities between this H bridge motor driver and other components in the subcategory of Motion Control Electronics.There is a supply of electricity from 9V to the electrical load.

BA6218 Features

Available in 9-SIP Package / Case
Operating Temperature at the range of Through Hole
Interface IC Type : BA6218

BA6218 Applications

There are a lot of ROHM Semiconductor
BA6218 Full Bridge Drivers, Half-Bridge Drivers applications.

Desktop Computers
V-Core
Non-V-Core
Workstations
High-Current DC-DC Point-of-Load Converters
Networking Microprocessor Voltage Regulators
Telecom Microprocessor
Voltage Regulators
Small Form-Factor Voltage Regulator Modules
Notebook Computers

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.