ROHM BA3472FV-E2

Manufacturer No:

BA3472FV-E2

Manufacturer:

ROHM

Package:

8-LSSOP (0.173, 4.40mm Width)

Description:

30mA per Channel 100nA 60 dB Instrumentational OP Amps 0.5?A 18V 3V~36V ±1.5V~18V BA3472 8 Pins 8-LSSOP (0.173, 4.40mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

BA3472FV-E2 information

ROHM BA3472FV-E2 technical specifications, attributes, parameters and parts with similar specifications to ROHM BA3472FV-E2.

Type
Parameter

Factory Lead Time
6 Weeks

Contact Plating
Copper, Tin

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
8-LSSOP (0.173, 4.40mm Width)

Number of Pins
8

Operating Temperature
-40°C~85°C

Packaging
Tape & Reel (TR)

Published
2008

Pbfree Code
yes

Part Status
Active

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Subcategory
Operational Amplifier

Packing Method
TAPE AND REEL

Technology
BIPOLAR

Terminal Position
DUAL

Terminal Form
GULL WING

Number of Functions
2

Supply Voltage
15V

Terminal Pitch
0.65mm

Base Part Number
BA3472

Pin Count
8

Number of Elements
2

Operating Supply Current
4mA

Nominal Supply Current
5.5mA

Power Dissipation
690mW

Output Current
30mA

Slew Rate
10V/?s

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
General Purpose

Common Mode Rejection Ratio
60 dB

Current - Input Bias
100nA

Voltage - Supply, Single/Dual (±)
3V~36V ±1.5V~18V

Output Current per Channel
30mA

Input Offset Voltage (Vos)
10mV

Bandwidth
4MHz

Neg Supply Voltage-Nom (Vsup)
-15V

Voltage Gain
100dB

Average Bias Current-Max (IIB)
0.5?A

Power Supply Rejection Ratio (PSRR)
60dB

Low-Offset
NO

Frequency Compensation
YES

Voltage - Input Offset
1.5mV

Low-Bias
NO

Micropower
NO

Download datasheets and manufacturer documentation for ROHM BA3472FV-E2.

BA3472FV-E2 Overview

In the package, you will find a 8-LSSOP (0.173, 4.40mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. A Tape & Reel (TR) case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 15V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. The op amp ic has an array of 8 pins on it. Op amp rates 10mV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. Using an 4mA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 100dB for the time being. 2 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 18V. The linear amplifier is packaged by using a TAPE AND REEL axis.

BA3472FV-E2 Features

8 Pins
supply voltage of 15V
100dB voltage gain

BA3472FV-E2 Applications

There are a lot of ROHM Semiconductor
BA3472FV-E2 Instrumentational OP Amps applications.

Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
Signal operation
Video computer boards

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.