ADESTO AT25DF081A-MH-Y
Manufacturer No:
AT25DF081A-MH-Y
Manufacturer:
Package:
8-UDFN Exposed Pad
Description:
Surface Mount 8 Pin Memory IC 8 Mb kb 6mm mm 20mA mA 8b b
Quantity:
Delivery:
Payment:
In Stock :Available
Price not displayed? Please send an RFQ, and we will respond immediately.
AT25DF081A-MH-Y information
ADESTO AT25DF081A-MH-Y technical specifications, attributes, parameters and parts with similar specifications to ADESTO AT25DF081A-MH-Y.
- Type
- Parameter
- Factory Lead Time
- 8 Weeks
- Mount
- Surface Mount
- Mounting Type
- Surface Mount
- Package / Case
- 8-UDFN Exposed Pad
- Number of Pins
- 8
- Operating Temperature
- -40°C~85°C TC
- Packaging
- Tray
- Published
- 1997
- JESD-609 Code
- e4
- Part Status
- Active
- Moisture Sensitivity Level (MSL)
- 3 (168 Hours)
- Number of Terminations
- 8
- ECCN Code
- EAR99
- Terminal Finish
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Technology
- CMOS
- Voltage - Supply
- 2.7V~3.6V
- Terminal Position
- DUAL
- Peak Reflow Temperature (Cel)
- 260
- Number of Functions
- 1
- Supply Voltage
- 3V
- Terminal Pitch
- 1.27mm
- Pin Count
- 8
- Operating Supply Voltage
- 3.3V
- Supply Voltage-Max (Vsup)
- 3.6V
- Interface
- SPI, Serial
- Memory Size
- 8Mb 256Bytes x 4096 pages
- Nominal Supply Current
- 20mA
- Memory Type
- Non-Volatile
- Clock Frequency
- 100MHz
- Memory Format
- FLASH
- Memory Interface
- SPI
- Data Bus Width
- 8b
- Memory Width
- 1
- Write Cycle Time - Word, Page
- 7μs, 3ms
- Address Bus Width
- 1b
- Density
- 8 Mb
- Standby Current-Max
- 0.00001A
- Sync/Async
- Synchronous
- Word Size
- 8b
- Programming Voltage
- 2.7V
- Serial Bus Type
- SPI
- Endurance
- 100000 Write/Erase Cycles
- Data Retention Time-Min
- 20
- Write Protection
- HARDWARE/SOFTWARE
- Page Size
- 256B
- Length
- 6mm
- Height Seated (Max)
- 0.6mm
Download datasheets and manufacturer documentation for ADESTO AT25DF081A-MH-Y.
Datasheets:
AT25DF081A-MH-Y Overview
Non-Volatile is the type of memory it has. There is a Tray case available. The 8-UDFN Exposed Pad case contains it. The chip has an 8Mb 256Bytes x 4096 pages memory. This device uses a FLASH-format memory, which is of mainstream design. A wide operating temperature range makes this device ideal for a variety of demanding applications. A voltage of 2.7V~3.6V can be supplied to memory ics. Its recommended mounting type is Surface Mount. The chip has 8 terminations. For a comprehensive working procedure, this part supports as many as 1 functions. In order to operate this memory device, it must be supplied with 3V of power. It is important to note that the memory has a clock frequency rotation within the range of 100MHz. The memory device is enclosed in a package with an 8-pin connector. There are 8 pins on this memory device, which indicates it has 8 memory locations in it. A voltage of 3.3V is noted as the operating supply voltage for this memory. In this chip, Surface Mount mounting is used, a straightforward, high-efficiency mounting method. In terms of its nominal supply current, this memory component is rated at 20mA. Data is carried and transferred to the CPU by the SPI-type serial bus this memory integrates with. Nonvolatile memory arrays require 2.7V programming voltage to change their state.
AT25DF081A-MH-Y Features
Package / Case: 8-UDFN Exposed Pad
8 Pins
Operating Supply Voltage:3.3V
AT25DF081A-MH-Y Applications
There are a lot of Adesto Technologies
AT25DF081A-MH-Y Memory applications.
- cell phones
- eSRAM
- mainframes
- multimedia computers
- networking
- personal computers
- servers
- supercomputers
- telecommunications
- workstations,
User Guide
Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.
MEANS OF PAYMENTFor your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.
RFQ (REQUEST FOR QUOTATIONS)Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.
Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.
Step1：Prepare product
Step2：Desiccant Protection
Step3：Vacuum Packaging
Step4：Individual Package
Step5：Anti-collision Filling
Step6：Packaging Box
1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
DELIVERY TIME1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.
AT25DF081A-MH-Y Relevant information
The following parts are popular search parts in Integrated Circuits (ICs).
AIChipLink – Your Trusted Electronic Components Distributor
12.28 M
Listed Part Number
3,000+
Leading Manufacturers
4.9 M
In-stock SKU
15,000+
Warehouse Area(㎡)