AP2014ASL-13-DIODES-Price, Stock & Datasheet

AP2014ASL-13 Overview

With its 8-SOIC (0.154, 3.90mm Width) package, the switching controller fits the needs of most applications. For outputs of 1, this dc motor controller is suitable. Cut Tape (CT) solid enclosure protects the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control operates at 5V 12V and has a 5V 12V supply voltage. Worked in a 0°C~125°C TJ dc switcher before. In this switching controller, the switch can be set to 400kHz. The Surface Mount allows it to be used for dc dc regulator in general. In order to control switching efficiently, the dcdc regulator features Soft Start. SWITCHING CONTROLLER analog IC connects the switch converters. Switching converters are designed with the terminal (s) at position DUAL . The 8 terminations can be used for a wide range of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 5V is input. Searching "AP2014" will return other relevant dc to dc converter ics. 8 pins are on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. Input voltage of dc dc voltage regulator should be 0.76V. If you are starting a new project, you should note the dc dc regulator's typical output current is 3A. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 90 %. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. There is a maximum frequency of 460kHz on this dc regulators. There is 7mA supply current for it. The nominal supply current for this the controllers dc is 7mA.