Advanced Linear Devices Inc. ALD2701SBL
Advanced Linear Devices Inc. ALD2701SBL

Advanced Linear Devices Inc. ALD2701SBL

Manufacturer No:

ALD2701SBL

Package:

14-SOIC (0.154, 3.90mm Width)

Description:

2 Channels 1mA per Channel 1pA 60 dB Instrumentational OP Amps 5V 2V~12V ±1V~6V 14-SOIC (0.154, 3.90mm Width)

Delivery:

DHL
DHL
DHL
DHL

Payment:

DHL
DHL
DHL
DHL
DHL
DHL

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

ALD2701SBL information

Advanced Linear Devices Inc. ALD2701SBL technical specifications, attributes, parameters and parts with similar specifications to Advanced Linear Devices Inc. ALD2701SBL.

  • Type
  • Parameter
  • Factory Lead Time
  • 8 Weeks
  • Mount
  • Surface Mount
  • Mounting Type
  • Surface Mount
  • Package / Case
  • 14-SOIC (0.154, 3.90mm Width)
  • Number of Pins
  • 14
  • Supplier Device Package
  • 14-SOIC
  • Operating Temperature
  • 0°C~70°C
  • Packaging
  • Tube
  • Published
  • 2012
  • Part Status
  • Active
  • Moisture Sensitivity Level (MSL)
  • 1 (Unlimited)
  • Max Operating Temperature
  • 70°C
  • Min Operating Temperature
  • 0°C
  • Output Type
  • Rail-to-Rail
  • Operating Supply Voltage
  • 5V
  • Number of Channels
  • 2
  • Number of Circuits
  • 2
  • Operating Supply Current
  • 240μA
  • Nominal Supply Current
  • 500μA
  • Output Current
  • 1mA
  • Current - Supply
  • 240μA
  • Slew Rate
  • 1V/μs
  • Amplifier Type
  • General Purpose
  • Common Mode Rejection Ratio
  • 60 dB
  • Voltage - Supply, Single/Dual (±)
  • 2V~12V ±1V~6V
  • Output Current per Channel
  • 1mA
  • Input Offset Voltage (Vos)
  • 10mV
  • Gain Bandwidth Product
  • 1MHz
  • Voltage - Input Offset
  • 10mV
  • Current - Output / Channel
  • 1mA
  • Min Dual Supply Voltage
  • 1V
  • RoHS Status
  • RoHS Compliant

Download datasheets and manufacturer documentation for Advanced Linear Devices Inc. ALD2701SBL.

ALD2701SBL Overview


Packaged in a 14-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. The op amp is delivered to you in a Tube case. A total of 14 pins are present on the instrumentation amplifier. There is an input offset voltage of 10mV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . As long as the supply current of the chip does not exceed 240μA, this op amp ic can operate. During the manufacturing process, this buffer amplifier is divided into 2 circuits. As far as the device is concerned, buffer amplifier has 2 channels. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. For the buffer op amp to operate properly, it must be above the temperature of 0°C degrees Celsius. No temperature greater than 70°C should be used. The operating supply voltage of the buffer op amp is rated at 5V. As a result, it is recommended that a power supply of 240μA be used with this electronic part.

ALD2701SBL Features


Output Type: Rail-to-Rail


ALD2701SBL Applications


There are a lot of Advanced Linear Devices Inc.
ALD2701SBL Instrumentational OP Amps applications.


  • Integrator circuits
  • Differentiator circuits
  • Logarithmic operation circuits
  • Exponential operation circuits
  • Multiplication circuits
  • Division circuits
  • Precision measurement
  • Power control
  • Information processing
  • Weak signal detection

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1:Prepare product

Step1:Prepare product

Step2:Desiccant Protection

Step2:Desiccant Protection

Step3:Vacuum Packaging

Step3:Vacuum Packaging

Step4:Individual Package

Step4:Individual Package

Step5:Anti-collision Filling

Step5:Anti-collision Filling

Step6:Packaging Box

Step6:Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.