Advanced Linear Devices Inc. ALD1706GPAL

Manufacturer No:

ALD1706GPAL

Manufacturer:

Advanced Linear Devices Inc.

Package:

8-DIP (0.300, 7.62mm)

Description:

1 Channels 200μA per Channel 0.1pA 60 dB Instrumentational OP Amps 5V 2V~12V ±1V~6V 8-DIP (0.300, 7.62mm)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

ALD1706GPAL information

Advanced Linear Devices Inc. ALD1706GPAL technical specifications, attributes, parameters and parts with similar specifications to Advanced Linear Devices Inc. ALD1706GPAL.

Type
Parameter

Factory Lead Time
8 Weeks

Mount
Through Hole

Mounting Type
Through Hole

Package / Case
8-DIP (0.300, 7.62mm)

Number of Pins
8

Supplier Device Package
8-PDIP

Operating Temperature
0°C~70°C

Packaging
Tube

Published
2012

Part Status
Active

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Max Operating Temperature
70°C

Min Operating Temperature
0°C

Output Type
Rail-to-Rail

Operating Supply Voltage
5V

Number of Channels
1

Number of Circuits
1

Operating Supply Current
20μA

Nominal Supply Current
50μA

Output Current
200μA

Current - Supply
20μA

Slew Rate
0.17V/μs

Amplifier Type
General Purpose

Common Mode Rejection Ratio
60 dB

Voltage - Supply, Single/Dual (±)
2V~12V ±1V~6V

Output Current per Channel
200μA

Input Offset Voltage (Vos)
10mV

Gain Bandwidth Product
400kHz

Voltage Gain
98dB

Voltage - Input Offset
10mV

Current - Output / Channel
200μA

Max Dual Supply Voltage
6V

Min Dual Supply Voltage
1V

RoHS Status
RoHS Compliant

Download datasheets and manufacturer documentation for Advanced Linear Devices Inc. ALD1706GPAL.

Datasheets:

advancedlineardevicesinc-ald1706asal-datasheets-5593.pdf

ALD1706GPAL Overview

Packaged in a 8-DIP (0.300, 7.62mm) case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. The op amp is delivered to you in a Tube case. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 10mV for this buffer op amp. The mounting type that is recommended for this electrical part is Through Hole. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . As long as the supply current of the chip does not exceed 20μA, this op amp ic can operate. 98dB should remain the voltage gain. During the manufacturing process, this buffer amplifier is divided into 1 circuits. As far as the device is concerned, buffer amplifier has 1 channels. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. For the buffer op amp to operate properly, it must be above the temperature of 0°C degrees Celsius. No temperature greater than 70°C should be used. The operating supply voltage of the buffer op amp is rated at 5V. As a result, it is recommended that a power supply of 20μA be used with this electronic part. As a rule of thumb, you should conduct this electronic part under a dual voltage supply of 6V volts.

ALD1706GPAL Features

98dB voltage gain
Output Type: Rail-to-Rail

ALD1706GPAL Applications

There are a lot of Advanced Linear Devices Inc.
ALD1706GPAL Instrumentational OP Amps applications.

Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.