ADI ADP1879ACPZ-0.6-R7

ADP1879ACPZ-0.6-R7 Overview

As a result of 14-WFDFN Exposed Pad, CSP compact design, the switching controller is compatible with most applications. 1 outputs are supported by the dc motor controller. An enclosure of Tape & Reel (TR) is used to package the PMIC. The system can process Transistor Driver dc switching's outputs (s). 2.95V~20V is the supply voltage and the operating voltage of the dc control. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. The switching controller is capable of switching at the 600kHz position. dc dc regulator can be generalized using Surface Mount. Switching control is made easier with the dcdc regulator's Enable, Power Good, Soft Start. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. switching converters terminal (s) are designed to be at DUAL. There are many different types of terminations for 14. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 12V. A search for "ADP1879" will reveal other relevant dc to dc converter ics. 14 pins are present on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. Statistically, the DC regulator outputs 600mV voltage. The maximum duty cycle of this voltage regulator dc to dc is set to 65 % to ensure reliability during power-up and power-down. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. DC regulators have a maximum frequency of 600kHz. DC to DC voltage regulator has the value of ALSO AVAILABLE ADJUSTABLE OUTPUT DOWN TO 0.6V to better satisfy the requirement. A circuit should contain 20V in order to ensure the voltage regulator dc to dc runs safely and reliably. In order to limit the voltage of a dc switcher whose maximum input voltage is 20V, it must be limited by the user. Voltage 2.95V is necessary for the supply. Input current cannot exceed 25A with this dc switcher. At its maximum, the switching converter can output 18V volts. The supply current of the voltage controller is 1.1μA. At its lowest voltage, the voltage controller does not produce less than 600mV.

ADP1879ACPZ-0.6-R7 Features

Transistor Driver Outputs
Switching Frequency: 600kHz
Enable, Power Good, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 65 %
ALSO AVAILABLE ADJUSTABLE OUTPUT DOWN TO 0.6V

ADP1879ACPZ-0.6-R7 Applications

There are a lot of Analog Devices Inc.
ADP1879ACPZ-0.6-R7 DC to DC converter applications.

• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment
• Injection molding machinery