ADI ADP1877ACPZ-R7

ADP1877ACPZ-R7 Overview

In the 32-VFQFN Exposed Pad, CSP package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 2. There is a Tape & Reel (TR) solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 2.75V~14.5V volts and has 2.75V~14.5V supply voltage. Suitable for working in an dc switcher that has a -40°C~85°C TA. It can switch at 200kHz~1.5MHz. As it has a Surface Mount value, it can be used for general dc dc regulator. To provide efficient switching control, Current Limit, Enable, Frequency Control, Power Good, Ramp, Soft Start, Tracking is included in the dcdc regulator. A DUAL SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. QUAD are the position of the terminal of the switching converters. Various 32 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. In addition to "ADP1877", there are other relevant dc to dc converter ics you can find. There are 32 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. DC regulator outputs 13.05V voltage based on test statistics. A starting point for a project is to note down the dc dc regulator's usual output current, which is 25A. Voltage regulator dc to dc is designed to operate at 90 % duty cycle during power-ups and power-downs to ensure reliability. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. Hence, ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 0.9 V is used to better suit the DC to DC voltage regulator's situation. The dc to dc voltage regulator is from the Flex-Mode® series. Since the dc switcher's maximum input voltage is 14.5V, the voltage must be regulated accordingly. Voltage 2.75V must be supplied. Depending on the datasheet, the switching converter can output 13V volts at its peak. 200?A volts is the supply current. A voltage controller's lowest output voltage cannot be less than 600mV. There is a nominal current supply of 5mA for this the controllers dc.

ADP1877ACPZ-R7 Features

Transistor Driver Outputs
Switching Frequency: 200kHz~1.5MHz
Current Limit, Enable, Frequency Control, Power Good, Ramp, Soft Start, Tracking
PULSE WIDTH MODULATION
Max Duty Cycle: 90 %
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 0.9 V

ADP1877ACPZ-R7 Applications

There are a lot of Analog Devices Inc.
ADP1877ACPZ-R7 DC to DC converter applications.

• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment