ADI ADP1853ACPZ-R7

ADP1853ACPZ-R7 Overview

In the 20-WFQFN Exposed Pad, CSP package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. There is a Tape & Reel (TR) solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 2.75V~20V volts and has 2.75V~20V supply voltage. Suitable for working in an dc switcher that has a -40°C~125°C TJ. It can switch at 200kHz~1.5MHz. As it has a Surface Mount value, it can be used for general dc dc regulator. To provide efficient switching control, Current Limit, Enable, Frequency Control, Power Good, Ramp, Soft Start, Tracking is included in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. QUAD are the position of the terminal of the switching converters. Various 20 terminations. In addition to "ADP1853", there are other relevant dc to dc converter ics you can find. There are 20 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. DC regulator outputs 18V voltage based on test statistics. A starting point for a project is to note down the dc dc regulator's usual output current, which is 25A. Voltage regulator dc to dc is designed to operate at 90 % duty cycle during power-ups and power-downs to ensure reliability. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 20V. Since the dc switcher's maximum input voltage is 20V, the voltage must be regulated accordingly. Voltage 2.75V must be supplied. An output current greater than 25A cannot be provided by the dc switcher. Depending on the datasheet, the switching converter can output 18V volts at its peak. 100?A volts is the supply current. A voltage controller's lowest output voltage cannot be less than 600mV. There is a nominal current supply of 4.2mA for this the controllers dc.

ADP1853ACPZ-R7 Features

Transistor Driver Outputs
Switching Frequency: 200kHz~1.5MHz
Current Limit, Enable, Frequency Control, Power Good, Ramp, Soft Start, Tracking
Max Duty Cycle: 90 %

ADP1853ACPZ-R7 Applications

There are a lot of Analog Devices Inc.
ADP1853ACPZ-R7 DC to DC converter applications.

• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment