ADI ADP1823ACPZ-R7

ADP1823ACPZ-R7 Overview

With its 32-WFQFN Exposed Pad, CSP package, the switching controller fits the needs of most applications. For outputs of 2, this dc motor controller is suitable. Tape & Reel (TR) solid enclosure protects the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control operates at 3.7V~20V and has a 3.7V~20V supply voltage. Worked in a -40°C~85°C TA dc switcher before. In this switching controller, the switch can be set to 300kHz 600kHz. The Surface Mount allows it to be used for dc dc regulator in general. In order to control switching efficiently, the dcdc regulator features Enable, Frequency Control, Power Good, Soft Start, Tracking. Searching "ADP1823" will return other relevant dc to dc converter ics. 32 pins are on switching converter. Based on the test statistics, DC regulator outputs voltage 17V. If you are starting a new project, you should note the dc dc regulator's typical output current is 20A. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 90 %. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. Switching controllers work at 1MHz Hz. When running the voltage regulator dc to dc in a circuit, users should apply 20V to ensure safety and reliability. Temperatures should be kept at -40°C or higher. There should be 85°C more than 85°C degrees Celsius in the machine. DC switching uses 1mA when it is dormant. In order to ensure the dc switcher's functionality, users must limit the voltage to 18V due to the dc switcher's maximum input voltage. There is 32-LFCSP-WQ (5x5) dc dc controller package associated with this part. In order to use a 3.7V voltage supply, switching controller is necessary to have one. DC switchers cannot produce output currents greater than 20A. Datasheets state the switching converter can output up to 15.3V volts. There is 10μA supply current for it. At least 600mV voltage is output by the voltage controller. Phases of this controller are 2. The nominal supply current for this the controllers dc is 3mA.

ADP1823ACPZ-R7 Features

Transistor Driver Outputs
Switching Frequency: 300kHz 600kHz
Enable, Frequency Control, Power Good, Soft Start, Tracking
Max Duty Cycle: 90 %
Frequency: 1MHz

ADP1823ACPZ-R7 Applications

There are a lot of Analog Devices Inc.
ADP1823ACPZ-R7 DC to DC converter applications.

• Ball screw pair
• Computer application technology
• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots