ADI ADP1822ARQZ-R7

Manufacturer No:

ADP1822ARQZ-R7

Manufacturer:

ADI

Package:

24-SSOP (0.154, 3.90mm Width)

Description:

24 Terminals 3.7V~5.5V 24-Pin ADP1822 DC to DC converter IC SWITCHING CONTROLLER 1 Outputs 310kHz 570kHz Transistor Driver

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

ADP1822ARQZ-R7 information

ADI ADP1822ARQZ-R7 technical specifications, attributes, parameters and parts with similar specifications to ADI ADP1822ARQZ-R7.

Type
Parameter

Lifecycle Status
PRODUCTION (Last Updated: 4 weeks ago)

Factory Lead Time
8 Weeks

Contact Plating
Tin

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
24-SSOP (0.154, 3.90mm Width)

Number of Pins
24

Operating Temperature
-40°C~85°C TA

Packaging
Tape & Reel (TR)

JESD-609 Code
e3

Pbfree Code
no

Part Status
Active

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
24

Termination
SMD/SMT

ECCN Code
EAR99

Subcategory
Switching Regulator or Controllers

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Terminal Pitch
0.635mm

Frequency
1.2MHz

Time@Peak Reflow Temperature-Max (s)
40

Base Part Number
ADP1822

Number of Outputs
1

Output Voltage
4.675V

Output Type
Transistor Driver

Max Output Current
20A

Operating Supply Voltage
5V

Input Voltage-Nom
5V

Analog IC - Other Type
SWITCHING CONTROLLER

Operating Supply Current
10?A

Nominal Supply Current
2mA

Output Configuration
Positive

Output Current
20A

Voltage - Supply (Vcc/Vdd)
3.7V~5.5V

Quiescent Current
1mA

Control Features
Enable, Frequency Control, Margining, Power Good, Soft Start, Tracking

Max Output Voltage
4.67V

Topology
Buck

Min Input Voltage
3.7V

Control Mode
VOLTAGE-MODE

Frequency - Switching
310kHz 570kHz

Max Input Voltage
5.5V

Control Technique
PULSE WIDTH MODULATION

Synchronous Rectifier
Yes

Min Output Voltage
600mV

Download datasheets and manufacturer documentation for ADI ADP1822ARQZ-R7.

Datasheets:

analogdevicesinc-adp1822arqzr7-datasheets-2637.pdf

ConflictMineralStatement:

analogdeviceslineartechnology-lt5400bhms8e8trpbf-conflictmineralstatement-8771.pdf

ADP1822ARQZ-R7 Overview

The switching controller fits in the 24-SSOP (0.154, 3.90mm Width) package and is ideal for most applications. dc motor controller is suitable for 1 output generation. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. There are Transistor Driver dc switching's output (s) that it can handle. A 3.7V~5.5V voltage is supplied to the dc control and used for operating it. Suitable for work in a -40°C~85°C TA dc switcher. With this switching controller, you can switch at 310kHz 570kHz. The Surface Mount makes it ideal for general dc dc regulator. Featured in the dcdc regulator is Enable, Frequency Control, Margining, Power Good, Soft Start, Tracking which allows efficient switching control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. There are a terminal (s) on the switching converters that are designed at DUAL. 24 terminations with various dc switching's functions. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. The DC switcher's nominal voltage is 5V. Other relevant dc to dc converter ics will be returned if you search "ADP1822". Total pins of switching converter are 24. Particularly, switching converter is a type of Switching Regulator or Controllers. A 4.675V voltage of DC regulator was detected in the test statistics. If you start a project, note down the dc dc regulator's usual output current of 20A. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. There is 1.2MHz frequency setting on the switching controller. To operate the voltage regulator dc to dc safely and reliably, users should apply 5V. During dormancy, the dc switching uses 1mA. The maximum input voltage of this dc switcher is 5.5V, so users must limit the voltage accordingly. A voltage of 3.7V must be present in the supply. A dc switcher can only produce an output current of 20A. A datasheet states that the switching converter can output 4.67V volts at its maximum. There is a 10?A volt supply current. Lowest voltage output of the voltage controller must be greater than 600mV. The nominal current supply of this the controllers dc is 2mA.

ADP1822ARQZ-R7 Features

Transistor Driver Outputs
Switching Frequency: 310kHz 570kHz
Enable, Frequency Control, Margining, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
Frequency: 1.2MHz

ADP1822ARQZ-R7 Applications

There are a lot of Analog Devices Inc.
ADP1822ARQZ-R7 DC to DC converter applications.

CMM
Various precision measuring instruments
Various precision measuring detectors
Flaw detection equipment
Balance equipment
Industrial robots
Industrial controllers
Die casting equipment
Injection molding machinery
Various CNC machine tools

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.