ADI ADG723BRM

Manufacturer No:

ADG723BRM

Manufacturer:

ADI

Package:

8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Description:

14ns, 6ns (Typ) SPST - NO/NC 4Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG723 8 Pins 250pA 3V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

ADG723BRM information

ADI ADG723BRM technical specifications, attributes, parameters and parts with similar specifications to ADI ADG723BRM.

Type
Parameter

Contact Plating
Lead, Tin

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Number of Pins
8

Operating Temperature
-40°C~85°C TA

Packaging
Tube

JESD-609 Code
e0

Pbfree Code
no

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Resistance
4Ohm

Additional Feature
ALSO OPEARTES AT 5 V SUPPLY

Subcategory
Multiplexer or Switches

Max Power Dissipation
5?W

Technology
CMOS

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
240

Number of Functions
2

Supply Voltage
3V

Terminal Pitch
0.65mm

Base Part Number
ADG723

Pin Count
8

Polarity
Non-Inverting

Power Supplies
3/5V

Number of Channels
2

Interface
Parallel

Max Supply Voltage
5.5V

Min Supply Voltage
1.8V

Nominal Supply Current
1?A

Power Dissipation
5?W

Max Supply Current
1?A

Throw Configuration
SPST

Turn On Delay Time
14 ns

Bandwidth
200MHz

Turn-Off Delay Time
6 ns

On-State Resistance (Max)
4Ohm

High Level Output Current
30mA

Multiplexer/Demultiplexer Circuit
1:1

Off-state Isolation-Nom
60 dB

Current - Leakage (IS(off)) (Max)
250pA

Channel Capacitance (CS(off), CD(off))
7pF 7pF

On-state Resistance Match-Nom
0.3Ohm

Switch Circuit
SPST - NO/NC

Download datasheets and manufacturer documentation for ADI ADG723BRM.

ADG723BRM Overview

The electrical component comes in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tube is used. In Surface Mount, you'll find this switch device. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operating temperature around -40°C~85°C TA extended. In total, 8 terminations have occurred. A electrical component with 2 channels is capable of high-quality output. When the electronic component is given a voltage of 3V, it should be turned on and run. Into the electrical component body are injected 8 pins. On the other hand, analog switches can be constructed using SPST - NO/NC switching circuits. Look for analog switch ic variants by searching with ADG723. A 4Ohm internal resistance characterizes this multiplexer. The datasheets for the 8 pins explain the functions. The analog multiplexer shown here is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. It is recommended to use 1.8V as the lowest voltage for the electrical part. Analogue multiplexers require a 1.8V~5.5V voltage to drain from a single voltage supply. A voltage higher than 1?A may cause damage to the switch multiplexer. It is possible to transfer data over a 200MHz-bandwidth. You shouldn't miss the additional features of the electrical component, such as: ALSO OPEARTES AT 5 V SUPPLY.

ADG723BRM Features

2 Channels
Switch Circuit: SPST - NO/NC
Bandwidth: 200MHz
Additional Features: ALSO OPEARTES AT 5 V SUPPLY

ADG723BRM Applications

There are a lot of Analog Devices Inc.
ADG723BRM Analog Switches & Multiplexers ICs applications.

Audio and video switching
Automatic test equipment
Precision data acquisition
Battery-powered systems
Sample-and-hold systems
Communication systems
Data Acquisition Systems
Relay Replacement
Battery Powered Systems
Existing multiplexer applications (both fault-protected and nonfault-protected)

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.