ADI ADG619BRMZ

Manufacturer No:

ADG619BRMZ

Manufacturer:

ADI

Package:

8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Description:

120ns, 75ns SPDT 6.5Ohm Analog Switches BREAK-BEFORE-MAKE ADG619 8 Pins 250pA 5V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

ADG619BRMZ information

ADI ADG619BRMZ technical specifications, attributes, parameters and parts with similar specifications to ADI ADG619BRMZ.

Type
Parameter

Lifecycle Status
PRODUCTION (Last Updated: 3 weeks ago)

Factory Lead Time
8 Weeks

Contact Plating
Tin

Mounting Type
Surface Mount

Package / Case
8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Surface Mount
YES

Number of Pins
8

Operating Temperature
-40°C~85°C TA

Packaging
Tube

JESD-609 Code
e3

Pbfree Code
no

Part Status
Active

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Resistance
6.5Ohm

Subcategory
Multiplexer or Switches

Max Power Dissipation
10?W

Technology
CMOS

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
1

Supply Voltage
5V

Terminal Pitch
0.65mm

Base Part Number
ADG619

Pin Count
8

Number of Outputs
2

Polarity
Non-Inverting

Number of Channels
1

Interface
Parallel

Max Supply Voltage
5.5V

Min Supply Voltage
2.7V

Operating Supply Current
1nA

Nominal Supply Current
1?A

Power Dissipation
10?W

Max Supply Current
1?A

Turn On Delay Time
120 ns

Voltage - Supply, Single/Dual (±)
2.7V~5.5V ±2.7V~5.5V

Supply Type
Dual, Single

Bandwidth
190MHz

Neg Supply Voltage-Nom (Vsup)
-5V

Turn-Off Delay Time
75 ns

Max Dual Supply Voltage
5.5V

On-State Resistance (Max)
6.5Ohm

Min Dual Supply Voltage
2.7V

High Level Output Current
50mA

Dual Supply Voltage
5V

Download datasheets and manufacturer documentation for ADI ADG619BRMZ.

ADG619BRMZ Overview

As the electronic part is packed in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tube. The multiplexer is located in Surface Mount. 2:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to -40°C~85°C TA. Total terminations are 8. The electronic part provides high-quality output because it has 1 channels. Powered by a 5V voltage supply, the electrical part should be switched on and run. The electrical component body receives 8 pins. Circuits based on SPDT switching are used to construct these analog switch ics. Try searching with ADG619 to find analog multiplexer variants. An switch multiplexer with 6.5Ohm internal resistance has a value of 6.5Ohm. Datasheets for 8 pin functions are available upon request. The analogue multiplexer in this example is a typical Multiplexer or Switches. Multiplexers should not be powered above 5.5V in normal situations. The analog switch ic is of the Dual, Single supply type and is cost-effective. The lowest voltage the electronic part should receive is 2.7V. An operating current of 1nA would be sufficient for this switch device. When the digital multiplexer is charged above 1?A, damage can occur. Despite this switch device's dual supply capability, its voltage should not exceed 5.5V. It is recommended that you attach at least 2.7V to your dual power supply. There are 190MHz bandwidths for data transfer. A analog switch ics with 2 outputs is included.

ADG619BRMZ Features

1 Channels
Switch Circuit: SPDT
1nA Supply Current
Bandwidth: 190MHz

ADG619BRMZ Applications

There are a lot of Analog Devices Inc.
ADG619BRMZ Analog Switches & Multiplexers ICs applications.

Imaging
Ultrasound
Audio and video switching
Automatic test equipment
Precision data acquisition
Battery-powered systems
Sample-and-hold systems
Communication systems
Data Acquisition Systems
Relay Replacement

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.