ADI ADG619BRM

Manufacturer No:

ADG619BRM

Manufacturer:

ADI

Package:

8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Description:

120ns, 75ns SPDT 6.5Ohm Analog Switches BREAK-BEFORE-MAKE ADG619 8 Pins 250pA 5V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

ADG619BRM information

ADI ADG619BRM technical specifications, attributes, parameters and parts with similar specifications to ADI ADG619BRM.

Type
Parameter

Mounting Type
Surface Mount

Package / Case
8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Surface Mount
YES

Number of Pins
8

Operating Temperature
-40°C~85°C TA

Packaging
Tube

JESD-609 Code
e0

Pbfree Code
no

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Resistance
6.5Ohm

Subcategory
Multiplexer or Switches

Max Power Dissipation
10?W

Technology
CMOS

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
240

Number of Functions
1

Supply Voltage
5V

Terminal Pitch
0.65mm

Time@Peak Reflow Temperature-Max (s)
30

Base Part Number
ADG619

Pin Count
8

Polarity
Non-Inverting

Number of Channels
1

Interface
Parallel

Max Supply Voltage
5.5V

Min Supply Voltage
2.7V

Operating Supply Current
1nA

Nominal Supply Current
1?A

Power Dissipation
10?W

Max Supply Current
1?A

Turn On Delay Time
120 ns

Voltage - Supply, Single/Dual (±)
2.7V~5.5V ±2.7V~5.5V

Supply Type
Dual, Single

Bandwidth
190MHz

Neg Supply Voltage-Nom (Vsup)
-5V

Turn-Off Delay Time
75 ns

Max Dual Supply Voltage
5.5V

On-State Resistance (Max)
6.5Ohm

Min Dual Supply Voltage
2.7V

High Level Output Current
50mA

Dual Supply Voltage
5V

Multiplexer/Demultiplexer Circuit
2:1

Off-state Isolation-Nom
67 dB

Current - Leakage (IS(off)) (Max)
250pA

Download datasheets and manufacturer documentation for ADI ADG619BRM.

ADG619BRM Overview

The electronic component is convenient to ship overseas because it is packed in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). The advanced packaging method Tube provides high reliability. It is mounted in the position Surface Mount. 2:1 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around -40°C~85°C TA. The total number of terminations is 8. As a result of its 1 channels, this electronic component provides high-quality output. An 5V voltage supply should allow the electrical part to be turned on and run. A total of 8 pins are injected into the body of the electronic part. Based on SPDT switching circuits, these analog multiplexers work. Use ADG619 to search for variants of the digital switches. The internal resistance of this digital multiplexer is 6.5Ohm. Datasheets for functions of 8 pins are available. Multiplexer or Switches is a typical switch device. normally, users should not supply switches with voltages higher than 5.5V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. A low voltage of 2.7V should be applied to the electronic component. This multiplexer would work with 1nA current. If you put voltage higher than 1?A on the digital multiplexer, damage may occur. For this multiplexer, dual supply voltage is feasible, but it should not exceed 5.5V. A dual power supply should have at least 2.7V voltage attached. There are various bandwidths available for data transfer. There are 2 outputs on the analogue multiplexer.

ADG619BRM Features

1 Channels
Switch Circuit: SPDT
1nA Supply Current
Bandwidth: 190MHz

ADG619BRM Applications

There are a lot of Analog Devices Inc.
ADG619BRM Analog Switches & Multiplexers ICs applications.

Low-Voltage
Isolation
Medical
Imaging
Ultrasound
Audio and video switching
Automatic test equipment
Precision data acquisition
Battery-powered systems
Sample-and-hold systems

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.