ADG451BR-ADI-Price, Stock & Datasheet

ADG451BR Overview

This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tube. A switch device like this is mounted in Surface Mount. 1:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, there have been 16 terminations. A 4 channel electronic part produces high-quality output. A 5V voltage supply should turn on and run the electronic component. An injection of 16 pins is performed into the body of the electrical component. Unlike digital switches, these are based on SPST - NC switching circuits. Try searching for ADG451 variants of the analog switch ic. Analog switches have 5Ohm internal resistance. To find out what the 16 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Users should never supply a voltage higher than 12V to a switch device. Analog switch ics with Dual, Single supply type are cost-effective. There should be 5V voltage fed to the electrical part below 5V. The switch multiplexer may be damaged if it is exposed to voltage greater than 500nA. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 15V. The voltage should be at least 5V if you are using dual power supplies. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. This electronic part has additional features, such as: ALSO OPERATE WITH 12V SINGLE SUPPLY. Resistivity from Drain to Source is 4mOhm for this electronic part.