ADI ADG1402BRMZ

Manufacturer No:

ADG1402BRMZ

Manufacturer:

ADI

Package:

8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Description:

150ns, 150ns SPST - NC 1.3Ohm Analog Switches BREAK-BEFORE-MAKE ADG1402 8 Pins 400pA 5V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

ADG1402BRMZ information

ADI ADG1402BRMZ technical specifications, attributes, parameters and parts with similar specifications to ADI ADG1402BRMZ.

Type
Parameter

Lifecycle Status
PRODUCTION (Last Updated: 1 week ago)

Factory Lead Time
8 Weeks

Contact Plating
Tin

Mounting Type
Surface Mount

Package / Case
8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Surface Mount
YES

Number of Pins
8

Operating Temperature
-40°C~125°C TA

Packaging
Tube

JESD-609 Code
e3

Pbfree Code
no

Part Status
Active

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Resistance
1.3Ohm

Subcategory
Multiplexer or Switches

Max Power Dissipation
1.44mW

Technology
CMOS

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
1

Supply Voltage
5V

Terminal Pitch
0.65mm

Base Part Number
ADG1402

Pin Count
8

Qualification Status
Not Qualified

Operating Supply Voltage
12V

Polarity
Non-Inverting

Number of Channels
1

Interface
Parallel

Max Supply Voltage
16.5V

Min Supply Voltage
5V

Test Frequency
1MHz

Power Dissipation
1.44mW

Max Supply Current
95?A

Turn On Delay Time
150 ns

Number of Inputs
1

Voltage - Supply, Single/Dual (±)
5V~16.5V ±4.5V~16.5V

Supply Type
Dual, Single

Bandwidth
120MHz

Neg Supply Voltage-Nom (Vsup)
-5V

Turn-Off Delay Time
150 ns

Max Dual Supply Voltage
16.5V

On-State Resistance (Max)
1.3Ohm

Min Dual Supply Voltage
4.5V

Dual Supply Voltage
15V

Download datasheets and manufacturer documentation for ADI ADG1402BRMZ.

ADG1402BRMZ Overview

The electronic part can be shipped overseas conveniently because it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). In order to provide high reliability, an advanced packaging method Tube is used. There is an analog multiplexer mounted in position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~125°C TA is the extended operating temperature. In total, there are 8 terminations. This electronic part offers high-quality output due to its 1 channels. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. There are 8 pins injected into the electronic part body. The analog switch ics are built using SPST - NC switching circuits. Search with ADG1402 if you are looking for analog multiplexer variants. It has an internal resistance of 1.3Ohm. The functions of 8 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 16.5V volts for the multiplexer. Dual, Single supply type digital switch with a low cost. 5V is the lowest voltage that should be fed to the electronic electronic part. A digital multiplexer may suffer damage if voltage is applied above 95?A. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 16.5V. In the case of dual power supplies, you should connect at least 4.5V. There is a voltage range of 12V operating voltages for the electrical part. There are 1 inputs to be operated. The transfer of data can be performed over 120MHz bandwidths.

ADG1402BRMZ Features

1 Channels
Switch Circuit: SPST - NC
Bandwidth: 120MHz

ADG1402BRMZ Applications

There are a lot of Analog Devices Inc.
ADG1402BRMZ Analog Switches & Multiplexers ICs applications.

Isolation
Medical
Imaging
Ultrasound
Audio and video switching
Automatic test equipment
Precision data acquisition
Battery-powered systems
Sample-and-hold systems
Communication systems

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.