ADF4218LBRU-Rochester-Price, Stock & Datasheet

ADF4218LBRU Overview

As a clock IC, it uses the Tube package. 20-TSSOP (0.173, 4.40mm Width) contains this Clock PLL. When reflowed, this frequency generator can withstand a maximum temperature of 220. As a result, frequency synthesizers can be found to contain 20 terminations. For this clock generator ic, a voltage of 3V is required. This Clock PLL will be fed by CMOS as its input. Providing a maximum frequency of 3GHz, this clock-based RF synthesizer is suitable for a variety of applications. The Surface Mount allows this electrical component to be easily installed on the panel. It would be possible to supply this clock PLL with 3.3V of power. For safety reasons, this frequency generator's supply voltage should remain above 2.6V. There are 2.6V~3.3V different supply voltages that can be provided for this RF synthesizer. If the frequency generator's operating temperature exceeds 85°C, it may pose a ha85°Card. Temperatures below -40°C could result in this clock PLL failing to start up. I would like to present to you a frequency synthesizer that is compatible with Clock logic levels. This is an electronic part that can be classified as a Clock/Frequency Synthesizer (RF/IF) in this case. In particular, this clock PLL is designed to be used with microprocessors. In order to provide better clock signal output, this frequency synthesizer is equipped with ALSO REQUIRES A 3V TO 5.5V SUPPLY.