ADI AD8552ARU-REEL

Manufacturer No:

AD8552ARU-REEL

Manufacturer:

ADI

Package:

8-TSSOP (0.173, 4.40mm Width)

Description:

2 Channels 30mA per Channel 10pA 115 dB Instrumentational OP Amps 0.004μA 3V 2.7V~5.5V AD8552 8 Pins 8-TSSOP (0.173, 4.40mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

AD8552ARU-REEL information

ADI AD8552ARU-REEL technical specifications, attributes, parameters and parts with similar specifications to ADI AD8552ARU-REEL.

Type
Parameter

Contact Plating
Lead, Tin

Mounting Type
Surface Mount

Package / Case
8-TSSOP (0.173, 4.40mm Width)

Surface Mount
YES

Number of Pins
8

Operating Temperature
-40°C~125°C

Packaging
Tape & Reel (TR)

JESD-609 Code
e0

Pbfree Code
no

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Subcategory
Operational Amplifier

Packing Method
TAPE AND REEL

Technology
CMOS

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
240

Number of Functions
2

Supply Voltage
5V

Terminal Pitch
0.65mm

Reach Compliance Code
not_compliant

Time@Peak Reflow Temperature-Max (s)
30

Pin Count
8

Qualification Status
Not Qualified

Output Type
Rail-to-Rail

Operating Supply Voltage
3V

Number of Channels
2

Operating Supply Current
1.95mA

Quiescent Current
975μA

Slew Rate
0.4V/μs

Architecture
CHOPPER-STAB

Amplifier Type
Zero-Drift

Common Mode Rejection Ratio
115 dB

Current - Input Bias
10pA

Voltage - Supply, Single/Dual (±)
2.7V~5.5V

Output Current per Channel
30mA

Input Offset Voltage (Vos)
5μV

Gain Bandwidth Product
1.5MHz

Unity Gain BW-Nom
1500 kHz

Voltage Gain
145dB

Average Bias Current-Max (IIB)
0.004μA

Power Supply Rejection Ratio (PSRR)
115dB

Low-Offset
YES

Frequency Compensation
YES

Supply Voltage Limit-Max
6V

Download datasheets and manufacturer documentation for ADI AD8552ARU-REEL.

Datasheets:

analogdevicesinc-ad8552arzreel-datasheets-0965.pdf

ConflictMineralStatement:

analogdeviceslineartechnology-lt5400bhms8e8trpbf-conflictmineralstatement-8771.pdf

AD8552ARU-REEL Overview

Packaged in a 8-TSSOP (0.173, 4.40mm Width) case, the buffer op amp is ready to use. An op amp ic of the Zero-Drift type. The op amp is delivered to you in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 5μV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . As long as the supply current of the chip does not exceed 1.95mA, this op amp ic can operate. 145dB should remain the voltage gain. As far as the device is concerned, buffer amplifier has 2 channels. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 3V. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted. Currently, linear amplifier is operating with a quiescent current of 975μA.

AD8552ARU-REEL Features

8 Pins
supply voltage of 5V
145dB voltage gain
Output Type: Rail-to-Rail

AD8552ARU-REEL Applications

There are a lot of Analog Devices Inc.
AD8552ARU-REEL Instrumentational OP Amps applications.

Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.