ADI AD8008ARM-REEL7

Manufacturer No:

AD8008ARM-REEL7

Manufacturer:

ADI

Package:

MSOP

Description:

8μA 54 dB Instrumentational OP Amps 9V 8 Pins MSOP

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

AD8008ARM-REEL7 information

ADI AD8008ARM-REEL7 technical specifications, attributes, parameters and parts with similar specifications to ADI AD8008ARM-REEL7.

Type
Parameter

Mount
Surface Mount

Package / Case
MSOP

Number of Pins
8

Packaging
Tape and Reel

JESD-609 Code
e0

Pbfree Code
no

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Max Operating Temperature
85°C

Min Operating Temperature
-40°C

Subcategory
Operational Amplifier

Technology
BIPOLAR

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
240

Number of Functions
1

Supply Voltage
5V

Terminal Pitch
0.65mm

Reach Compliance Code
not_compliant

Time@Peak Reflow Temperature-Max (s)
30

Pin Count
8

Qualification Status
Not Qualified

Operating Supply Voltage
9V

Temperature Grade
INDUSTRIAL

Max Supply Voltage
12V

Min Supply Voltage
5V

Slew Rate
740 V/μs

Architecture
CURRENT-FEEDBACK

Amplifier Type
OPERATIONAL AMPLIFIER

Common Mode Rejection Ratio
54 dB

Current - Input Bias
8μA

Input Offset Voltage (Vos)
4mV

Neg Supply Voltage-Nom (Vsup)
-5V

Power Supply Rejection Ratio (PSRR)
59dB

Low-Offset
NO

Frequency Compensation
YES

Max Dual Supply Voltage
6V

Low-Bias
NO

Micropower
NO

Min Dual Supply Voltage
2.5V

Programmable Power
NO

Wideband
YES

Length
3mm

Height Seated (Max)
1.1mm

Width
3mm

RoHS Status
RoHS Compliant

Download datasheets and manufacturer documentation for ADI AD8008ARM-REEL7.

ConflictMineralStatement:

analogdeviceslineartechnology-lt5400bhms8e8trpbf-conflictmineralstatement-8771.pdf

AD8008ARM-REEL7 Overview

A MSOP case is used to package the op amp. OPERATIONAL AMPLIFIER-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tape and Reel case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. It should be noted that this op amp is a type of Operational Amplifier device. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 4mV. In order for op amp to function properly, the temperature should not be lower than -40°C degrees Celsius. Instrumentation amplifier should only be used at temperatures up to 85°C. There are a total of 2 elements in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 9V. I would like to point out that this electrical component is capable of working from a voltage below 12V as far as the power supply is concerned. As a general rule, it is advisable to keep the op amp's supply voltage above 5V at all times. The dual supply voltage of 6V should be used for the conduct of this electronic component.

AD8008ARM-REEL7 Features

8 Pins
supply voltage of 5V

AD8008ARM-REEL7 Applications

There are a lot of Analog Devices, Inc.
AD8008ARM-REEL7 Instrumentational OP Amps applications.

Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.