ADI AD744JN

Manufacturer No:

AD744JN

Manufacturer:

ADI

Package:

PDIP

Description:

100pA 70 dB Instrumentational OP Amps 9V 8 Pins PDIP

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

AD744JN information

ADI AD744JN technical specifications, attributes, parameters and parts with similar specifications to ADI AD744JN.

Type
Parameter

Contact Plating
Lead, Tin

Mount
Through Hole

Package / Case
PDIP

Number of Pins
8

JESD-609 Code
e0

Number of Terminations
8

ECCN Code
EAR99

Max Operating Temperature
70°C

Min Operating Temperature
0°C

Subcategory
Operational Amplifiers

Technology
BIPOLAR

Terminal Position
DUAL

Peak Reflow Temperature (Cel)
NOT APPLICABLE

Number of Functions
1

Supply Voltage
15V

Terminal Pitch
2.54mm

Reach Compliance Code
not_compliant

Time@Peak Reflow Temperature-Max (s)
NOT APPLICABLE

Pin Count
8

Qualification Status
Not Qualified

Operating Supply Voltage
9V

Number of Elements
1

Temperature Grade
COMMERCIAL

Max Supply Voltage
18V

Power Dissipation
500mW

Supply Current-Max
5mA

Slew Rate
75 V/μs

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
OPERATIONAL AMPLIFIER

Common Mode Rejection Ratio
70 dB

Current - Input Bias
100pA

Input Offset Voltage (Vos)
1mV

Bandwidth
13MHz

Gain Bandwidth Product
13MHz

Neg Supply Voltage-Nom (Vsup)
-15V

Unity Gain BW-Nom
13000 kHz

Voltage Gain
112.04dB

Low-Offset
NO

Frequency Compensation
YES

Max Dual Supply Voltage
18V

Low-Bias
YES

Min Dual Supply Voltage
4.5V

Dual Supply Voltage
15V

Height
3.43mm

Length
9.27mm

Width
7.24mm

RoHS Status
RoHS Compliant

Download datasheets and manufacturer documentation for ADI AD744JN.

ConflictMineralStatement:

analogdeviceslineartechnology-lt5400bhms8e8trpbf-conflictmineralstatement-8771.pdf

AD744JN Overview

Packaged in a PDIP case, the buffer op amp is ready to use. An op amp ic of the OPERATIONAL AMPLIFIER type. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 15V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifiers-type of devices. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 1mV for this buffer op amp. Keeping the voltage gain at 112.04dB is the best course of action. For the buffer op amp to operate properly, it must be above the temperature of 0°C degrees Celsius. No temperature greater than 70°C should be used. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 1. The operating supply voltage of the buffer op amp is rated at 9V. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 18V. As a rule of thumb, you should conduct this electronic part under a dual voltage supply of 18V volts.

AD744JN Features

8 Pins
supply voltage of 15V
112.04dB voltage gain

AD744JN Applications

There are a lot of Analog Devices, Inc.
AD744JN Instrumentational OP Amps applications.

Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.