AD539JDZ-ADI-Price, Stock & Datasheet

AD539JDZ Overview

Packing materials Tube are used.This module is embedded within the 16-CDIP (0.300, 7.62mm) package in order to provide cost-effectiveness.There is a considerable amount of use of 2-Quadrant bits per stage.The device operates at a voltage of 5V.In this case, the supply voltage is nominally negative and referred to as -5V.There is a modulated radio-frequency signal in the range of 60MHz.In order to prevent signals from reflecting off the other end of the transmission line, there are 16 terminations.A number of electronic parts with a similar part number can be found under AD539.It is a type of 16-pin electronic component noted for its superior performance and high quality.There is an electronic device in the subcategory Analog Computational Functions that falls under this classification.For mounting the component on the PCB, Through Hole is used.It is recommended that the device operate at a temperature of 70°C.Temperatures below 0°C should be maintained to ensure proper operation of electronic devices.The reflow temperature limit NOT SPECIFIED is determined by the component having the lowest temperature tolerance.In addition, it is ideally suited for the operating supply voltage of 10.2mA.For a dual supply, this voltage should be higher than 4.5V.Generally, dual supply voltages should be lower than 15V.The ANALOG MULTIPLIER OR DIVIDER integrated circuit operates on an analog basis.There is a modulated radio-frequency signal in the range of 25MHz.Due to its capability to handle a maximum input voltage of 4.2V, designers can make full use of its versatility.An element 2 is incorporated into it.15V has a maximum supply voltage limitation.For normal operation, a minimum supply voltage of 4.5V must be maintained.For failure prevention, the frequency should not exceed 60MHz.A voltage-controlled output current 1mA is available.A high degree of reliability can be attained by keeping the supply current below 10.2mA.